RE: custom board MPC8266

I remebereed the wrong file.=20
Take a look in arch/ppc/8260_io/uart.c

-----Original Message-----
From: Manisha Jagadhane [mailto:manisha.vj@gmail.com]=20
Sent: Friday, April 01, 2005 00:01
To: Rune Torgersen; linuxppc-embedded@ozlabs.org
Subject: Re: custom board MPC8266
=20
Thanks for the reply.=20
I have seen the file arch/ppc/8260_io/commproc.c, but there is nowhere
given where to configure the SMC1/SMC2/SCC1/SCC2 as serial console. In
the .config file, whether we have to set CONFIG_SCC_CONSOLE=3Dy option
and in this .config file, is it required to do any configuration to
set SMC1 as serial console?
=20
Please clarify.
=20
Thanking you in advance.
=20
Regards,
Manisha
=20
=20
On Mar 30, 2005 7:57 PM, Rune Torgersen [off-list ref] wrote:

quoted

If I remember correctly: You have to edit the
arch/ppc/82xx_io/commproc.c file (I think) to set up which=20

serial port

quoted

is used for console port.
=20

quoted

-----Original Message-----
From: linuxppc-embedded-bounces@ozlabs.org
[mailto:linuxppc-embedded-bounces@ozlabs.org] On Behalf Of
Manisha Jagadhane
Sent: Wednesday, March 30, 2005 05:32
To: linuxppc-embedded@ozlabs.org
Subject: custom board MPC8266

Hi,

I am using custom board based on MPC8266 processor. I have
successfully ported U-Boot 1.1.1 on it. I have used SMC1 as serial
port in the board. Does the 2.4.24 kernel version for ppc supports
SMC1 as serial console? Which configuration I have to give in the
.config file to configure SMC1 as serial console? Which board's
defconfig file  shall I take as a reference and which=20

kernel version

quoted

quoted

shall I use?

Please help me in this regard.

Thanking you in advance.

Regards,

Manisha.
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

=20
=20