Anybody know how to get more than 512MB (1-2GB) of RAM to work with
2.6.11 on a 8265?
Weird stuff and crashes keep happening on kernel start (vmalloc out of
memory, and a pci driver ups) when I tell the kernel I have more than
512MB of ram.
The pci craches happens when I tell the kernel I have 740-760MB or more.
Any idea of where to start to look for this?
Rune Torgersen
System Developer
Innovative Systems LLC
1000 Innovative Drive
Mitchell, SD 57301
Ph: 605-995-6120
www.innovsys.com
I would start looking at what addresses are getting assigned for VMALLOC vs any io_block_mapping() calls. I know I've had problems with large amount of memory in systems if the virt addrs allocated in io_block_mapping calls conflict with vmalloc addrs.
- kumar
On Mar 8, 2005, at 11:33 AM, Rune Torgersen wrote:
Anybody know how to get more than 512MB (1-2GB) of RAM to work with
2.6.11 on a 8265?
Weird stuff and crashes keep happening on kernel start (vmalloc out of
memory, and a pci driver ups) when I tell the kernel I have more than
512MB of ram.
The pci craches happens when I tell the kernel I have 740-760MB or more.
Any idea of where to start to look for this?
Rune Torgersen
System Developer
Innovative Systems LLC
1000 Innovative Drive
Mitchell, SD 57301
Ph: 605-995-6120
www.innovsys.com
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded