[PATCH] gianfar: Update Marvell PHY name

Jeff,

This patch updates the name identifier to list both of the Marvell PHYs 
that are supported.

Signed-off-by: Kumar Gala <redacted>

---
diff -Nru a/drivers/net/gianfar_phy.c b/drivers/net/gianfar_phy.c

--- a/drivers/net/gianfar_phy.c	2005-03-02 14:20:27 -06:00
+++ b/drivers/net/gianfar_phy.c	2005-03-02 14:20:27 -06:00

@@ -572,7 +572,7 @@
 static struct phy_info phy_info_marvell = {
 	.phy_id		= 0x01410c00,
 	.phy_id_mask	= 0xffffff00,
-	.name		= "Marvell 88E1101",
+	.name		= "Marvell 88E1101/88E1111",
 	.features	= MII_GBIT_FEATURES,
 	.config_aneg	= &marvell_config_aneg,
 	.read_status	= &marvell_read_status,

Jeff,

Just wondering if this got lost?  Might be moot depending what=20
likelihood of getting Andy's PHY Abstraction Layer changes into the=20
kernel.

- kumar

On Mar 4, 2005, at 1:55 AM, Kumar Gala wrote:

Jeff,

This patch updates the name identifier to list both of the Marvell =

PHYs

88E1101",

 +=A0=A0=A0=A0=A0=A0 .name=A0=A0 =A0=A0=A0=A0=A0=A0=A0 =3D "Marvell =

88E1101/88E1111",

=A0=A0=A0=A0=A0=A0=A0 .features=A0=A0=A0=A0=A0=A0 =3D =

MII_GBIT_FEATURES,

=A0=A0=A0=A0=A0=A0=A0 .config_aneg=A0=A0=A0 =3D &marvell_config_aneg,
=A0=A0=A0=A0=A0=A0=A0 .read_status=A0=A0=A0 =3D &marvell_read_status,
_______________________________________________
Linuxppc-embedded mailing list
 Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

applied