Looking for prebuilt PPC board with miniPCI slot

3 messages, 3 authors, 2005-03-02 · open the first message on its own page

Looking for prebuilt PPC board with miniPCI slot

From: Andriy Korud <hidden>
Date: 2005-03-02 13:18:32

Hi,
we are looking for a embedded board with at least one miniPCI slot and =
Ethernet port with performance at AMCC 405EP@333 level and Linux 2.6 =
support.=20
Have anybody heard about something like this preferably in Europe?

Thanks in advance,

--

Andriy Korud
software engineer,

http://www.vector.com.pl

Re: Looking for prebuilt PPC board with miniPCI slot

From: Stefan Nickl <hidden>
Date: 2005-03-02 13:41:30

On Wed, 2005-03-02 at 14:18 +0100, Andriy Korud wrote:
Hi,
we are looking for a embedded board with at least one miniPCI slot and Ethernet port with performance at AMCC 405EP@333 level and Linux 2.6 support. 
Have anybody heard about something like this preferably in Europe?
<shameless plug>

Hm, our EB405 only runs at 266 MHz, but there are other PowerPC-based
modules you can stick onto our EBC2 carrier board.

http://www.kontron.com/techlib/manuals/MAN-%20EBC2.pdf
http://www.kontron.com/contact/ct-emea.cfm

We also have an office in warsaw.

</shameless plug>   :-)

-- 
Stefan Nickl
Kontron Modular Computers

Re: Looking for prebuilt PPC board with miniPCI slot

From: Conn Clark <hidden>
Date: 2005-03-02 17:48:21

Andriy Korud wrote:
Hi,
we are looking for a embedded board with at least one miniPCI slot and Ethernet port with performance at AMCC 405EP@333 level and Linux 2.6 support. Have anybody heard about something like this preferably in Europe?

Thanks in advance,

--

Andriy Korud
software engineer,

http://www.vector.com.pl
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
There is the Inrinsyc Cerf Cube 405EP http://www.intrinsyc.com/products/mob_ref_sys/cerfcube_405_ep/  . It has a MiniPCI slot and uses the 405EP . I don't know where it stands as far as 2.6 kernel support. I'm pretty sure nobody is actively supporting it with the current 2.4 kernel at this time though. You might have to call them to find out where software development stands. They might be able to make you some with a 333MHz part.

-- Conn Clark

*****************************************************************
Give a man a match and you heat him for a moment. Set him on fire
and you'll heat him for life.
*****************************************************************

Conn Clark
Engineering Stooge				clark@esteem.com
Electronic Systems Technology Inc.		www.esteem.com

Stock Ticker Symbol				ELST
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help