Just updated a couple of old Mac 7200 (601) boxen and ran into trouble with
the ide driver and a promise PDC20267 card.
The very same drives and card work fine on a 9500 but hang on a 7200. If
I set the kernel arg ide=nodma I get in the dmesg:
ide_setup: ide=nodma : Prevented DMA
and the 7200 boots and runs fine.
Another suspect, the mace ethernet driver (which also appears to use DMA)
doesn't work on the 7200 with 2.6.11 but does with 2.4.28 and it works
with 2.6.11 on the 9500.
Finally, I don't think this is related to DMA however the OF frame buffer
driver, if compiled into the kernel, kills the platinumfb driver which wasn't
a problem in the 2.4 kernels either (I get a blank screen but the machine
keeps running).
Bob
On Mon, 2005-03-14 at 03:51 +0000, linuxppcdev@qbjnet.com wrote:
Just updated a couple of old Mac 7200 (601) boxen and ran into trouble with
the ide driver and a promise PDC20267 card.
The very same drives and card work fine on a 9500 but hang on a 7200. If
I set the kernel arg ide=nodma I get in the dmesg:
ide_setup: ide=nodma : Prevented DMA
and the 7200 boots and runs fine.
Another suspect, the mace ethernet driver (which also appears to use DMA)
doesn't work on the 7200 with 2.6.11 but does with 2.4.28 and it works
with 2.6.11 on the 9500.
Interesting. Not sure what's up, though. Those old machines were known
to have bugs relative to cache coherency... also check wetehr we are
setting the cache line size properly in PCI devices. You can also try to
disable use of PCI memory write & invalidate command in all devices.
Finally, I don't think this is related to DMA however the OF frame buffer
driver, if compiled into the kernel, kills the platinumfb driver which wasn't
a problem in the 2.4 kernels either (I get a blank screen but the machine
keeps running).
Ah ? platinumfb alone works, and platinumfb + offb fails ? weird ...
Ben.