Newer laptops & CPU speed

Hi !

It seems the new laptops are booting with CPU set to low
speed. /proc/cpuinfo outputs the wrong fequency (thinks it's high speed)
but bogomips shows that it's running at about half speed. This patch
against 2.6.11 (will not apply on 2.6.10) adds proper cpufreq support so
that the boot speed is recognized (fixing /proc/cpuinfo output) and so
you can acutally use cpufreq interface & utilities to switch to full
speed (I recommend powernowd).

This is completely untested as I don't have access to any of those new
models yet, so I'm waiting for some feedback before submitting upstream.

Ben.

Index: linux-work/arch/ppc/platforms/pmac_cpufreq.c
===================================================================

--- linux-work.orig/arch/ppc/platforms/pmac_cpufreq.c	2005-03-13 18:23:11.000000000 +1100
+++ linux-work/arch/ppc/platforms/pmac_cpufreq.c	2005-03-14 13:32:36.000000000 +1100

@@ -464,20 +464,22 @@
 	u32 *reg;
 	struct cpufreq_driver *driver = &pmac_cpufreq_driver;
 
-	/* OF only reports the high frequency */
-	hi_freq = cur_freq;
-	low_freq = cur_freq/2;
-	driver->get = dfs_get_cpu_speed;
-	cur_freq = driver->get(0);
-
+	/* Look for voltage GPIO */
 	volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
+	reg = (u32 *)get_property(volt_gpio_np, "reg", NULL);
+	voltage_gpio = *reg;
 	if (!volt_gpio_np){
 		printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n");
 		return 1;
 	}
 
-	reg = (u32 *)get_property(volt_gpio_np, "reg", NULL);
-	voltage_gpio = *reg;
+	/* OF only reports the high frequency */
+	hi_freq = cur_freq;
+	low_freq = cur_freq/2;
+
+	/* Read actual frequency from CPU */
+	driver->get = dfs_get_cpu_speed;
+	cur_freq = driver->get(0);
 	set_speed_proc = dfs_set_cpu_speed;
 
 	return 0;

@@ -492,7 +494,7 @@
  *  - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz)
  *  - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage)
  *  - Recent MacRISC3 laptops
- *  - iBook G4s and PowerBook G4s with 7447A CPUs
+ *  - All new machines with 7447A CPUs
  */
 static int __init pmac_cpufreq_setup(void)
 {

@@ -513,11 +515,10 @@
 		goto out;
 	cur_freq = (*value) / 1000;
 
-	/*  Check for 7447A based iBook G4 or PowerBook */
-	if (machine_is_compatible("PowerBook6,5") ||
-	    machine_is_compatible("PowerBook6,4") ||
-	    machine_is_compatible("PowerBook5,5") ||
-	    machine_is_compatible("PowerBook5,4")) {
+	/*  Check for 7447A based MacRISC3 */
+	if (machine_is_compatible("MacRISC3") &&
+	    get_property(cpunode, "dynamic-power-step", NULL) &&
+	    PVR_VER(mfspr(SPRN_PVR)) == 0x8003) {
 		pmac_cpufreq_init_7447A(cpunode);
 	/* Check for other MacRISC3 machines */
 	} else if (machine_is_compatible("PowerBook3,4") ||

On Mon, Mar 14, 2005 at 01:33:42PM +1100, Benjamin Herrenschmidt wrote:

It seems the new laptops are booting with CPU set to low
speed. /proc/cpuinfo outputs the wrong fequency (thinks it's high speed)
but bogomips shows that it's running at about half speed. This patch
against 2.6.11 (will not apply on 2.6.10) adds proper cpufreq support so
that the boot speed is recognized (fixing /proc/cpuinfo output) and so
you can acutally use cpufreq interface & utilities to switch to full
speed (I recommend powernowd).

This is completely untested as I don't have access to any of those new
models yet, so I'm waiting for some feedback before submitting upstream.

My ibook G4 boots at low speed. /proc/cpuinfo shows 666MHz and a smiliar
bogomips value. Nevertheless, the cpu frequency scaler works, i.e. set
it to performance to be at high speed after boot up, or, as I currently
do, use the userspace governor and powernowd. All this is without your
patch (Did not try it yet, my ibook lacks internet) on linus' 2.6.11.

Bye,

Joerg

My ibook G4 boots at low speed. /proc/cpuinfo shows 666MHz and a smiliar
bogomips value. Nevertheless, the cpu frequency scaler works, i.e. set
it to performance to be at high speed after boot up, or, as I currently
do, use the userspace governor and powernowd. All this is without your
patch (Did not try it yet, my ibook lacks internet) on linus' 2.6.11.

Sure, I already had support for some models :) The patch extends it to
all present and future models that are MacRISC3 and have a 7447A CPU.

Ben.

On Wed, Mar 16, 2005 at 10:35:35AM +1100, Benjamin Herrenschmidt wrote:

quoted

My ibook G4 boots at low speed. /proc/cpuinfo shows 666MHz and a smiliar
bogomips value. Nevertheless, the cpu frequency scaler works, i.e. set
it to performance to be at high speed after boot up, or, as I currently
do, use the userspace governor and powernowd. All this is without your
patch (Did not try it yet, my ibook lacks internet) on linus' 2.6.11.

Sure, I already had support for some models :) The patch extends it to
all present and future models that are MacRISC3 and have a 7447A CPU.

When I remember my usbstick tonight, I'll give it a try.


Bye,

Joerg