RE: board with no RTC

Thanks to everyone who responded.  Now that a RTC is not a requirement,
can anyone offer advice on what I will need to do to get the kernel
(2.4.18) to play nice?


Thanks,
Ed

-----Original Message-----
From: Ed.Goforth@gd-ais.com [mailto:Ed.Goforth@gd-ais.com]=20
Sent: Wednesday, January 12, 2005 6:26 PM
To: linuxppc-embedded@ozlabs.org
Subject: board with no RTC
=20
=20
We have a 440gx based custom board.  I have learned that it does not
have a RTC. Has anyone had any success with a board without a=20
RTC, or is
it even possible?  How much of a problem will this cause? =20
=20
Should we get the board respun with a RTC?  We would prefer=20
using a 2.4
kernel, but would certainly go to a 2.6 kernel if that made things
easier.
=20
Thanks in advance for any advice.
=20
Ed Goforth
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
=20