RE: Linux 2.6-10.rc3 8xx kernel booting - how to set baud rate f or the serial driver ?

I forgot to mention that my command line in .config is:
CONFIG_CMDLINE="console=ttyCPM0 panic=3 root=/dev/ram"

Could I specify the baud rate (just for kernel booting, not for
bootstrapping) in the command line ?

 -----Original Message-----
From: 	Povolotsky, Alexander  
Sent:	Sunday, January 16, 2005 5:59 AM
To:	'linuxppc-dev@ozlabs.org'
Subject:	Linux 2.6-10.rc3  8xx kernel booting - how to set baud rate
for the serial driver ?

Hi,

My bootloader uses 115200 baud rate for the serial output during boot
strapping.

Then, during Linux 2.6-10.rc3  8xx kernel booting - how to set certain
baud rate for the serial driver ?

When init_consoleI( ) is called - at what baud rate the 8xx serial driver
is getting set ?

Currently I am have:
CONFIG_SERIAL_CPM_CONSOLE
in my .config 

Is there a way to set (force) the baud rate in the .config (or by other
means) to be in effect for the kernel booting ?

Thanks,
Best Regards