RE: Embedded linux port for PowerPC ?

From: linuxppc-embedded-bounces@ozlabs.org

[mailto:linuxppc-embedded-bounces@ozlabs.org] On Behalf Of Mukund JB.

	Sent: Wednesday, October 13, 2004 6:45 AM
	To: linuxppc-embedded@ozlabs.org
	Subject: Embedded linux port for PowerPC ?
=0D
Hello all,

This is my first visit to the mailists.=0D
I have assigned to port Embedded Linux to PowerPC Board.
=0D
Where do I get the Embedded Linux kernel & Source code for

PowerPC?

Can you provide me with some documents related to porting

Embedded Linux to PowerPC Board?

How do I know the available Embedded Linux ports for PowerPC?

Regards,

Mukund jampala

See
  <http://denx.de/e/index1.php?head=3Dsolution-se-head>

Download the Embedded Linux Development Kit (ELDK) from
<http://www.denx.de>
=0D
http://denx.de/e/index1.php?head=3Ddocs-head&main=3Ddocs&subnav=
=3Ddocs-subnav&
logo=3Dlogo-se&mainnav=3Ddocsnav&bottom=3Dbottom-se
This is the #1 easiest solution (in my book at least) to a cross
development environment.

Read the documentation there DENX U-Boot and Linux Guide (DULG) -- while
it says 8xx, it generally applies to all PowerPCs.
  <http://www.denx.de/twiki/bin/view/DULG/Manual>

If you need a boot loader (quite likely), look at u-boot.  Download it
and read the README file for instructions on how to port it to your
hardware.  U-boot is also associated with Wolfgang Denks (denx.de).
  <http://sourceforge.net/projects/u-boot>

Good luck and read carefully.  There is a wealth of good information in
those resources.

gvb

******************************************
The following messages are brought to you by the Lawyers' League of
IdioSpeak:

******************************************
The information contained in, or attached to, this e-mail, may contain=
 confidential information and is intended solely for the use of the=
 individual or entity to whom they are addressed and may be subject to=
 legal privilege.  If you have received this e-mail in error you should=
 notify the sender immediately by reply e-mail, delete the message from=
 your system and notify your system manager.  Please do not copy it for any=
 purpose, or disclose its contents to any other person.  The views or=
 opinions presented in this e-mail are solely those of the author and do=
 not necessarily represent those of the company.  The recipient should=
 check this e-mail and any attachments for the presence of viruses.  The=
 company accepts no liability for any damage caused, directly or=
 indirectly, by any virus transmitted in this email.
******************************************