A little more info. The hang occurs on this line:
dummy = ((immap_t *)IMAP_ADDR)->im_clkrst.res[0];
Which is _supposed_ to generate a machine check I believe.
So I guess my next step is to see if somehow the DER got set and we're
popping into debug mode instead of resetting...
-M
--
Mark S. Mathews
AbsoluteValue Systems Web: http://www.linux-wlan.com
721-D North Drive e-mail: mark@linux-wlan.com
Melbourne, FL 32934 Phone: 321.259.0737
USA Fax: 321.259.0286
---------- Forwarded message ----------
Date: Wed, 25 Aug 2004 16:22:00 -0400 (EDT)
From: Mark S. Mathews <redacted>
To: linuxppc-embedded <redacted>
Subject: m8xx hang in reboot
Hey Folks,
I've got an mpc850 based setup running 2.4.27 that, under certain
circumstances, hangs in the the m8xx_restart() function (instead of rebooting)
when I issue the usermode reboot cmd.
I've traced all through the path and confirmed that yes, it is hanging in this
function. ;-)
I'm still looking over the databook and what this code does. Just figured I'd
ask around and see if anyone else has seen this behavior.
Thanks,
-Mark
--
Mark S. Mathews
AbsoluteValue Systems Web: http://www.linux-wlan.com
721-D North Drive e-mail: mark@linux-wlan.com
Melbourne, FL 32934 Phone: 321.259.0737
USA Fax: 321.259.0286
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
The saga continues... ;-)
I added code to explicitly clear the CHSTPE bit in the DER register.
Didn't make any difference.
I'm stumped.
-M
On Wed, 25 Aug 2004, Mark S. Mathews wrote:
A little more info. The hang occurs on this line:
dummy = ((immap_t *)IMAP_ADDR)->im_clkrst.res[0];
Which is _supposed_ to generate a machine check I believe.
So I guess my next step is to see if somehow the DER got set and we're
popping into debug mode instead of resetting...
-M
--
Mark S. Mathews
AbsoluteValue Systems Web: http://www.linux-wlan.com
721-D North Drive e-mail: mark@linux-wlan.com
Melbourne, FL 32934 Phone: 321.259.0737
USA Fax: 321.259.0286
---------- Forwarded message ----------
Date: Wed, 25 Aug 2004 16:22:00 -0400 (EDT)
From: Mark S. Mathews <redacted>
To: linuxppc-embedded <redacted>
Subject: m8xx hang in reboot
Hey Folks,
I've got an mpc850 based setup running 2.4.27 that, under certain
circumstances, hangs in the the m8xx_restart() function (instead of
rebooting)
when I issue the usermode reboot cmd.
I've traced all through the path and confirmed that yes, it is hanging in
this
function. ;-)
I'm still looking over the databook and what this code does. Just figured
I'd
ask around and see if anyone else has seen this behavior.
Thanks,
-Mark
--
Mark S. Mathews
AbsoluteValue Systems Web: http://www.linux-wlan.com
721-D North Drive e-mail: mark@linux-wlan.com
Melbourne, FL 32934 Phone: 321.259.0737
USA Fax: 321.259.0286
--
Mark S. Mathews
AbsoluteValue Systems Web: http://www.linux-wlan.com
721-D North Drive e-mail: mark@linux-wlan.com
Melbourne, FL 32934 Phone: 321.259.0737
USA Fax: 321.259.0286
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/