Re:64360 serial driver for 2.6....

You can try to change the macro XXX_SERIAL_1_ADDR and XXX_SERIAL_2_ADDR. The
value of XXX_SERIAL_1_ADDR is 0xef600008 and the value of XXX_SERIAL_2_ADDR is
0xef600000.

Greetings.

I see that a few people are working with the 64x60 chips
from Marvell. Has anyone ported the serial driver from 2.4
into 2.6 yet? I have the 2.4 code and have ported the
serial console code to 2.6 just fine, but I would rather
not waste my time porting the serial driver proper if
someone else has done it already. Please CC: me on the
reply as I cannot subscribe to any of the PPC lists, even
after multiple attempts.

-Steve

--http://www.eyou.com
--������������������  ��������  ��������  ��������  ��������...��������

--http://vip.eyou.com
--������������VIP����  ������������������


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/