Hi all,
I am trying to boot my Ebony-evb with u-boot and a kernel image generated
from devel-sourcetree from Denx. It seems to me like the kernel image simply
ignores the parameters handed over by u-boot. I also found some earlier
threads
that support my thoughts. Unfortunately I am bound to u-boot and I am
not able
to switch back to the native bootloader that comes with the evb. Has anyone
already a system up and running booted by u-boot? At first it does not
matter whether
the root filesystem comes from flash or over nfs. Any hints would be
appreciated.
Thanks in advance
Markus
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
We also were trying to get this to work, however, the ebony setup ignores
the uboot parameters...so, unless you modify the code, you're stuck with
this...
However, you could configure the kernel with boot parameters hard
coded...that's what we are currently doing.
At 01:56 PM 7/22/2004 +0200, Markus Bernauer wrote:
Hi all,
I am trying to boot my Ebony-evb with u-boot and a kernel image generated
from devel-sourcetree from Denx. It seems to me like the kernel image simply
ignores the parameters handed over by u-boot. I also found some earlier
threads
that support my thoughts. Unfortunately I am bound to u-boot and I am
not able
to switch back to the native bootloader that comes with the evb. Has anyone
already a system up and running booted by u-boot? At first it does not
matter whether
the root filesystem comes from flash or over nfs. Any hints would be
appreciated.
Thanks in advance
Markus
+==========================================================+
Brian N. Hawley bhawley@luminex.com
Luminex Software, Inc. http://www.luminex.com
PO Box 5908 voice: 909-781-4100 x112
Riverside, CA 92517 fax: 909-781-4105
+==========================================================+
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/