On Mon, Jun 28, 2004 at 05:48:07PM -0400, Robert P. J. Day wrote:

  after messing with the kernel config of the latest "bk pull", and
building a new kernel and ramdisk, i got:

RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Configuring localhost networking ...
SIOCSIFADDR: No such device   (ignore, i tried to configure eth0)
Mounting /proc filesystem ...
Mounting /tmp filesystem ...
There are no /dev/mtdblock devices here, aborting.  (no, not really)
Clearing /var/log/msgs and starting syslogd ...
I found portmap, so I'll start it now ...
I found telnetd, so I'll start it now ...
Bailing for testing purposes.


BusyBox v1.00-pre10 (2004.06.24-

... and hang.

so, from the above, i got

1) localhost networking configured
2) /proc mounted
3) /tmp (tmpfs) mounted
4) syslog, portmap and telnet starting
5) an exit from the startup script since i wanted to keep things
   simple

at that point, /etc/inittab has the line:

::respawn:-/bin/sh

/bin/sh being, of course, a link to busybox.  i'm not sure what to
make of the partial output, perhaps some problem with the serial or
console port that the shell is trying to use.  so i guess it's on to
poking around the console port, see if that's the issue.

getting so close ...

Which serial driver did you use?  For me 8xx_UART does not work, but
CPM_UART will (it's still not quite correct, I have to config in both
SMC1 and SCC1 to get SMC1 to work, but I'm burried under a bunch of
other stuff right now).

--
Tom Rini
http://gate.crashing.org/~trini/

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/