RE: MPC8260 ethernet transmit problem

Check your port initialization: do you have the Tx (and Rx) clock configured properly?  Do you have the Tx data and control lines configured properly?

gvb

-----Original Message-----
From: owner-linuxppc-embedded@lists.linuxppc.org
[mailto:owner-linuxppc-embedded@lists.linuxppc.org]On Behalf Of
matik@ug.bilkent.edu.tr
Sent: Tuesday, June 15, 2004 1:37 PM
To: linuxppc-embedded@lists.linuxppc.org
Subject: MPC8260 ethernet transmit problem



Hi all,

I am using Windriver SBCPowerQUICC2 with MPC8265 on it with
2.4.26 kernel. When I configure FCC ethernet on one of
FCC1/2/3 it does not transmit any packet through channel
although it successfully calls 'fcc_enet_xmit' function.
Note: reception works.

Thanks.
matik

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Also check the PHY initialization function.
Cheers,
T.mike

-----Original Message-----
From: owner-linuxppc-embedded@lists.linuxppc.org
[mailto:owner-linuxppc-embedded@lists.linuxppc.org]On Behalf Of
VanBaren, Gerald (AGRE)
Sent: Tuesday, June 15, 2004 8:06 AM
To: linuxppc-embedded@lists.linuxppc.org
Subject: RE: MPC8260 ethernet transmit problem



Check your port initialization: do you have the Tx (and Rx) clock configured
properly?  Do you have the Tx data and control lines configured properly?

gvb

-----Original Message-----
From: owner-linuxppc-embedded@lists.linuxppc.org
[mailto:owner-linuxppc-embedded@lists.linuxppc.org]On Behalf Of
matik@ug.bilkent.edu.tr
Sent: Tuesday, June 15, 2004 1:37 PM
To: linuxppc-embedded@lists.linuxppc.org
Subject: MPC8260 ethernet transmit problem



Hi all,

I am using Windriver SBCPowerQUICC2 with MPC8265 on it with
2.4.26 kernel. When I configure FCC ethernet on one of
FCC1/2/3 it does not transmit any packet through channel
although it successfully calls 'fcc_enet_xmit' function.
Note: reception works.

Thanks.
matik

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/