RE: baud rate question

If you're using U-Boot as your Linux bootloader then probably the only thing
you need to do is to pass your desired baud rate through the bootargs as
follows:
console=ttyS0,<baud_rate>

Here's my sample bootargs setting for 115200 baud rate:
bootargs=root=/dev/nfs nfsroot=198.185.4.28:/home/visitor/exports/target
ip=198.185.4.88:198.185.4.28:198.185.4.1:255.255.255.0:mytarget:eth2:off
console=ttyS0,115200

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/