Re: ppc-82xx_objcopy hangs

3 messages, 3 authors, 2004-05-14 · open the first message on its own page

Re: ppc-82xx_objcopy hangs

From: Wolfgang Denk <hidden>
Date: 2004-05-13 16:16:33

In message [off-list ref] you wrote:
2. when compiling the ppcboot-2.0.0-custom sources (with support for our
system), the compilation succeeds, but
ppc_82xx-objcopy --gap-fill=0xff -O srec ppcboot ppcboot.srec
gets stuck.

Idem for a system where I only brought in a couple of changes from the
old sources. Any ideas as to what code might cause this problem?
Seems you version of objcopy is broken. Try using the native objcopy,
or the cross objcopy from the ELDK.

Best regards,

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
"Tell the truth and run."                          - Yugoslav proverb

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

baud rate question

From: Brian Hawley <hidden>
Date: 2004-05-13 16:39:03

Forgive the obvious newbie question, but we've tried everything, reviewed
the readme's, etc.

We are using the linux-2.5-ocp tree from bk.

We are using u-boot 1.0.0.

We set u-boot to 38400 in the config.  linux wants to be 9600 by
default.  So, we realize
that we can't see the kernel boot up.

We've tried changing u-boot back to 9600, but haven't been able to.

Is there a way to tell linux to come up at a different baud rate?  We've
tried the earlyserialpk option, and the console options...but no luck.

Thanks for any assistance.

-- Brian


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: ppc-82xx_objcopy hangs

From: Marc Leeman <hidden>
Date: 2004-05-14 13:29:43

Seems you version of objcopy is broken. Try using the native objcopy,
or the cross objcopy from the ELDK.
Wolfgang,

It seems you were right, your version of the GCC compiler does not
produce this problem [1], while the MVista tools do [2]. I guess it's
time to issue a bug report.

[1] [malm@bpscltpd u-boot-1.1.1]$ ppc_82xx-gcc --version
ppc_82xx-gcc (GCC) 3.2.2 20030217 (Yellow Dog Linux 3.0 3.2.2-2a_1)
Copyright (C) 2002 Free Software Foundation, Inc., in ELDK

[2] [malm@bpscltpd ppcboot]$ ppc_82xx-gcc --version
ppc_82xx-gcc (GCC) 3.3.1 (MontaVista 3.3.1-3.0.13.0400526 2004-04-16)
Copyright (C) 2003 Free Software Foundation, Inc., in MVista 3.1

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help