Re: Simple module, but won't build

3 messages, 3 authors, 2004-05-05 · open the first message on its own page

Re: Simple module, but won't build

From: Wolfgang Denk <hidden>
Date: 2004-05-04 21:46:18

In message [off-list ref] you wrote:
make -C $KERNELSRCDIR SUBDIRS=$PWD modules

This should give you the correct gcc options.

[Speaking of vanilla kernel, not knowing ELDK in this respect].
Same for ELDK. We use a standard Linux kernel,  too  [just  some  bug
fixes and extensions included].

Best regards,

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
"It's when they say 2 + 2 = 5 that I begin to argue."    - Eric Pepke

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Next steps

From: Brian Hawley <hidden>
Date: 2004-05-04 23:50:58

We've finally gotten the 2.5 kernel to boot using u-boot [ 2.6.3 doesn't,
nor did 2.4 variants ] on a PPC440GP
on the Ebony board.

At this point, it is trying to talk to a dhcp/bootp server and get a NFS
root filesystem.

Eventually, we'll be porting this to a custom board with some other chip
set support on it.

Our application will essentially be data acquisition and
transmission.  We'll be talking to the chipset to
suck data off [ and push data ] and on the other side push/pull data from
the PCI bus.

Linux is probably overkill for this, but we wanted a development platform
we could extend in the future
more readily.

I'm curious as to the direction people think we should take at this
point.  Should we be trying to set up
a root NFS filesystem [ presumably because it is easier to change -- and
then moving it to an initrd ? ]?

What do we need on the NFS filesystem...

What resources can you point me to to help us make the transition to the
next level.

Any help is appreciated,

Thanks.

-- Brian

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: Next steps

From: Bob White <hidden>
Date: 2004-05-05 12:19:06

I'm curious as to the direction people think we should take at this
point.  Should we be trying to set up
a root NFS filesystem [ presumably because it is easier to change -- and
then moving it to an initrd ? ]?

What do we need on the NFS filesystem...
Are you using the ELDK?  Have you seen:

http://www.denx.de/twiki/bin/view/DULG/ELDKMountingTargetComponentsViaNF
S

Bob
--
Robert B. White        Perigee, A Division of Sensis Corp
Software Design Engr   316 Commerce Blvd.
TEL: 315.453.7842x29   Liverpool, NY  13088
FAX: 315.453.7917      www.Perigee.com


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help