In message <00a101c401d4$26140fc0$0400a8c0@portatile> you wrote:
With the previous ELDK2.0 I would have generated the image with the "make
pImage" command while now I suppose the command "make uImage" must be used.
Is this correct?
This is correct, but "make pImage" will still work, too.
Then at the end of compilation process, I have the following message:
"mkimage" not found - U-boot Images will not be built.
The "mkimage" should be in your PATH when using the ELDK - it gets
installed in /opt/eldk/usr/bin/
Anybody has an idea where I am wrong?
Maybe your PATH ist not correct?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de
Felson's Law:
To steal ideas from one person is plagiarism; to steal from
many is research.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Dear Wolfgang
Maybe your PATH ist not correct?
You are perfectly right! I didn't add the line "export
PATH=$PATH:/opt/eldk/usr/bin" to .bashrc.
Many thanks
quoted
With the previous ELDK2.0 I would have generated the image with the
"make
quoted
pImage" command while now I suppose the command "make uImage" must be
used.
quoted
Is this correct?
This is correct, but "make pImage" will still work, too.
unfortunately I had the following messages:
[gianfranco@home001 linux]$ make pImage
make: *** No rule to make target `pImage'. Stop.
[gianfranco@home001 linux]$ grep -r pImage *
arch/ppc/boot/Makefile:pImage: $(MKIMAGE) images/vmlinux.gz
[gianfranco@home001 linux]$ grep -r uImage *
arch/ppc/boot/Makefile:uImage \
arch/ppc/boot/Makefile: ln -sf vmlinux.UBoot images/uImage
arch/ppc/Makefile:BOOT_TARGETS = zImage zImage.initrd znetboot
znetboot.initrd uImage
CHANGELOG:Add support for U-Boot boot image "uImage"
[gianfranco@home001 linux]$
Should I modify BOOT_TARGET into arch/ppc/Makefile?
Best regards
Gianfranco
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
AFAIK, uImage target does not exist for all linuxppc sources. I got my
kernel sources from PenguinPPC bitkeeper so it does not have it. I just
build vmlinux target and use the following steps to generate uImage (which
is documented in U-Boot documentation)
(taken from my shell script that automates this stuff)
${CROSS_COMPILE}objcopy -O binary -R .note -R .comment -S vmlinux vmlinux.bin
gzip -9 vmlinux.bin
$MKIMAGE -n "Linux Image" -A ppc -O linux -T kernel -C gzip -a 0 -e 0 \
-d vmlinux.bin.gz" uImage
Dear Wolfgang
quoted
Maybe your PATH ist not correct?
You are perfectly right! I didn't add the line "export
PATH=$PATH:/opt/eldk/usr/bin" to .bashrc.
Many thanks
quoted
quoted
With the previous ELDK2.0 I would have generated the image with the
"make
quoted
quoted
pImage" command while now I suppose the command "make uImage" must be
used.
quoted
quoted
Is this correct?
This is correct, but "make pImage" will still work, too.
unfortunately I had the following messages:
[gianfranco@home001 linux]$ make pImage
make: *** No rule to make target `pImage'. Stop.
[gianfranco@home001 linux]$ grep -r pImage *
arch/ppc/boot/Makefile:pImage: $(MKIMAGE) images/vmlinux.gz
[gianfranco@home001 linux]$ grep -r uImage *
arch/ppc/boot/Makefile:uImage \
arch/ppc/boot/Makefile: ln -sf vmlinux.UBoot images/uImage
arch/ppc/Makefile:BOOT_TARGETS = zImage zImage.initrd znetboot
znetboot.initrd uImage
CHANGELOG:Add support for U-Boot boot image "uImage"
[gianfranco@home001 linux]$
Should I modify BOOT_TARGET into arch/ppc/Makefile?
Best regards
Gianfranco
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/