# Re: Linux on MPC5200 - LITE5200EVAL

- List: linuxppc-dev
- 1 message, 1 author
- Page: https://ratatoskr.run/linuxppc-dev/2004/02/9391789/t

## Re: Linux on MPC5200 - LITE5200EVAL

- From: Wolfgang Denk \<hidden\>
- Date: 2004-02-14 00:16:23 
- Message: https://ratatoskr.run/linuxppc-dev/2004/02/9391789.md

```text

In message [ref] you wrote:
>
> The "new" output is included at the end , quite similar.
>
> One other weird things is that I was forced to setenv bootargs, then
> saveenv it, then reset to try to boot. If i just set the bootargs before
> the bootm, it decompressed the two images, but the kernel was not
> (apparently) starting ...

Did you make any progress? If  not:  are  you  absolutely  sure  your
hardware is OK?


Best regards,

Wolfgang Denk

--
See us @ Embedded World, Nuremberg, Feb 17 - 19,  Hall 12.0 Booth 440
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
There has been an alarming increase in the number of things you  know
nothing about.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
```