I also cannot use CVS from behind a firewall, but it is not
the fault of CVS. Since I use CVS only infrequently, I ssh
out from my firewall to a node outside my firewall, run cvs
from there, and sftp the resulting tree back behind my firewall.
For infrequent use, this might be an acceptable setup.
-----Original Message-----
From: Wolfgang Denk [mailto:wd@denx.de]
Sent: Friday, February 06, 2004 9:01 AM
To: song sam
Cc: linuxppc-embedded@lists.linuxppc.org
Subject: Re: Which kernel tree
Dear Sam,
in message [off-list ref] you
wrote:
quoted
There is also linuxppc_2_4_devel on our CVS server,
which is 2.4.24-preX
But how to make it?I used WinCvs in WIN2000 and CVS
command in REDHAT 7.3 as
cvs -d :pserver:anonymous@www.denx.de:/cvsroot login
but couldn't connect.If I use proxty like
I cannot comment on WinCvs (as I've never worked under Windoze), but
CVS in RH-7.3 will certainly work.
Are you sure that it's not some other configuration on your end which
is preventing CVS from working? Like a firewall blocking the CVS port
(2401) ?
172.12.18.1:8080 which I can login your webpage,how
could I get to linuxppc_2_4_devel?
Use CVS. It works.
Best regards,
Wolfgang Denk
--
See us @ Embedded World, Nuremberg, Feb 17 - 19, Hall 12.0 Booth 440
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de
Do not follow where the path may lead....go instead where there is no
path and leave a trail.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
In this type of situation, using cvs over ssh is a better solution.
Google it. I think Apache developers have to do this these days.
Check out:
http://xml.apache.org/forrest/community/howto/cvs-ssh/howto-cvs-ssh.html
Kerl, John wrote:
I also cannot use CVS from behind a firewall, but it is not
the fault of CVS. Since I use CVS only infrequently, I ssh
out from my firewall to a node outside my firewall, run cvs
from there, and sftp the resulting tree back behind my firewall.
For infrequent use, this might be an acceptable setup.
-----Original Message-----
From: Wolfgang Denk [mailto:wd@denx.de]
Sent: Friday, February 06, 2004 9:01 AM
To: song sam
Cc: linuxppc-embedded@lists.linuxppc.org
Subject: Re: Which kernel tree
Dear Sam,
in message [off-list ref] you
wrote:
quoted
quoted
There is also linuxppc_2_4_devel on our CVS server,
which is 2.4.24-preX
But how to make it?I used WinCvs in WIN2000 and CVS
command in REDHAT 7.3 as
cvs -d :pserver:anonymous@www.denx.de:/cvsroot login
but couldn't connect.If I use proxty like
I cannot comment on WinCvs (as I've never worked under Windoze), but
CVS in RH-7.3 will certainly work.
Are you sure that it's not some other configuration on your end which
is preventing CVS from working? Like a firewall blocking the CVS port
(2401) ?
quoted
172.12.18.1:8080 which I can login your webpage,how
could I get to linuxppc_2_4_devel?
Use CVS. It works.
Best regards,
Wolfgang Denk
--
See us @ Embedded World, Nuremberg, Feb 17 - 19, Hall 12.0 Booth 440
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de
Do not follow where the path may lead....go instead where there is no
path and leave a trail.
--
Christopher R. Johnson
Principal Software Engineer
GCC Printers
(781)276-8763
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/