9 messages, 3 authors, 2004-08-05 · open the first message on its own page
From: Alex Zeffertt <hidden>
Date: 2004-01-26 11:41:22
Just a quick note to say that multi-phy is now supported by the mpc860sar ATM driver, thanks to a patch by Rodolfo Giometti. Page: http://sourceforge.net/projects/mpc860sar/ Alex ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
From: Gilad Rom <hidden>
Date: 2004-01-26 13:51:28
This is very exciting news! (well, for me it is) How many PHY's in parallel are we talking about here? Thanks, Gilad. ----- Original Message ----- From: "Alex Zeffertt" <redacted> To: <redacted>; [off-list ref] Sent: Monday, January 26, 2004 1:41 PM Subject: [Linux-ATM-General] Announcement: MPHY now supported in mpc860sar
Just a quick note to say that multi-phy is now supported by the mpc860sar ATM driver, thanks to a patch by Rodolfo Giometti. Page: http://sourceforge.net/projects/mpc860sar/ Alex ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Linux-atm-general mailing list Linux-atm-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-atm-general
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
From: Alex Zeffertt <hidden>
Date: 2004-01-26 13:59:31
It is currently only supported in SAR mode, and in that mode there is an upper limit of 4 UTOPIA phys. However, there's no reason that support can't be added for MPHY in ESAR mode - in which the limit is 31 phys. I suspect that adding such support would be easier now that Rodolfo has done most of the work. Alex PS I'm not the expert on this. Rodolfo's sourceforge username is "zaigor". On Mon, 2004-01-26 at 13:51, Gilad Rom wrote:
This is very exciting news! (well, for me it is) How many PHY's in parallel are we talking about here? Thanks, Gilad. ----- Original Message ----- From: "Alex Zeffertt" <redacted> To: <redacted>; [off-list ref] Sent: Monday, January 26, 2004 1:41 PM Subject: [Linux-ATM-General] Announcement: MPHY now supported in mpc860sarquoted
Just a quick note to say that multi-phy is now supported by the mpc860sar ATM driver, thanks to a patch by Rodolfo Giometti. Page: http://sourceforge.net/projects/mpc860sar/ Alex ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Linux-atm-general mailing list Linux-atm-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-atm-general
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
From: Gilad Rom <hidden>
Date: 2004-01-26 14:03:51
Okay. Thanks. And now for my next question - Do you think the driver should run on the 82xx family of chips? (e.g. 8260 and the likes) these guys have 2 Utopia-II ports with support for up to 31 devices per port. Coupled with this software, it could make for a highly efficient DSLAM. Gilad. ----- Original Message ----- From: "Alex Zeffertt" <redacted> To: "Gilad Rom" <redacted> Cc: <redacted>; [off-list ref] Sent: Monday, January 26, 2004 3:59 PM Subject: Re: [Linux-ATM-General] Announcement: MPHY now supported inmpc860sar
It is currently only supported in SAR mode, and in that mode there is an upper limit of 4 UTOPIA phys. However, there's no reason that support can't be added for MPHY in ESAR mode - in which the limit is 31 phys. I suspect that adding such support would be easier now that Rodolfo has done most of the work. Alex PS I'm not the expert on this. Rodolfo's sourceforge username is "zaigor". On Mon, 2004-01-26 at 13:51, Gilad Rom wrote:quoted
This is very exciting news! (well, for me it is) How many PHY's in parallel are we talking about here? Thanks, Gilad. ----- Original Message ----- From: "Alex Zeffertt" <redacted> To: <redacted>; [off-list ref] Sent: Monday, January 26, 2004 1:41 PM Subject: [Linux-ATM-General] Announcement: MPHY now supported in
mpc860sar
quoted
quoted
Just a quick note to say that multi-phy is now supported by the mpc860sar ATM driver, thanks to a patch by Rodolfo Giometti. Page: http://sourceforge.net/projects/mpc860sar/ Alex ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Linux-atm-general mailing list Linux-atm-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-atm-general
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
From: Alex Zeffertt <hidden>
Date: 2004-01-26 14:17:48
All I know is that it won't run on the 8260 "as-is". Sorry, you'll have to RTFM. (The chapter on ATM is only ~180 pages :-). Alex On Mon, 2004-01-26 at 14:03, Gilad Rom wrote:
Okay. Thanks. And now for my next question - Do you think the driver should run on the 82xx family of chips? (e.g. 8260 and the likes) these guys have 2 Utopia-II ports with support for up to 31 devices per port. Coupled with this software, it could make for a highly efficient DSLAM. Gilad. ----- Original Message ----- From: "Alex Zeffertt" <redacted> To: "Gilad Rom" <redacted> Cc: <redacted>; [off-list ref] Sent: Monday, January 26, 2004 3:59 PM Subject: Re: [Linux-ATM-General] Announcement: MPHY now supported inmpc860sarquoted
It is currently only supported in SAR mode, and in that mode there is an upper limit of 4 UTOPIA phys. However, there's no reason that support can't be added for MPHY in ESAR mode - in which the limit is 31 phys. I suspect that adding such support would be easier now that Rodolfo has done most of the work. Alex PS I'm not the expert on this. Rodolfo's sourceforge username is "zaigor". On Mon, 2004-01-26 at 13:51, Gilad Rom wrote:quoted
This is very exciting news! (well, for me it is) How many PHY's in parallel are we talking about here? Thanks, Gilad. ----- Original Message ----- From: "Alex Zeffertt" <redacted> To: <redacted>; [off-list ref] Sent: Monday, January 26, 2004 1:41 PM Subject: [Linux-ATM-General] Announcement: MPHY now supported inmpc860sarquoted
quoted
quoted
Just a quick note to say that multi-phy is now supported by the mpc860sar ATM driver, thanks to a patch by Rodolfo Giometti. Page: http://sourceforge.net/projects/mpc860sar/ Alex ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Linux-atm-general mailing list Linux-atm-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-atm-general
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
From: Zoran Stojsavljevic <hidden>
Date: 2004-01-27 07:41:14
Hi to everyone, On our ADSL project we are using GlobeSpan Octane chipset. If anybody uses Octane, did you ever try to set up some loopback inside Octane's DSP? If yes, the question is how to do this (via GS APIs, but which)? Looking for quick answers... Best Regards, Zoran Stojsavljevic DKTS Pupin Telecom ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
From: Zoran Stojsavljevic <hidden>
Date: 2004-02-05 12:54:13
Quick question to you all... I walked through Pete's 8260 ATM driver, and I saw (as far as I can understand) that Pete's driver is set to support single PHY mode. So, the question here is: do we need Rodolfo Giometti's patch to be applied to mpc8260 ATM driver? It is obvious that different set-up should be applied for mpc8260 ATM driver MPHY mode anyway... Thank you for answers in advance. Regards, Zoran Stojsavljevic DKTS Pupin Telecom ----- Original Message ----- From: "Gilad Rom" <redacted> Sent: Monday, January 26, 2004 3:03 PM Subject: Re: [Linux-ATM-General] Announcement: MPHY now supported in mpc860sar
And now for my next question - Do you think the driver should run on the 82xx family of chips? (e.g. 8260 and the likes) these guys have 2 Utopia-II ports with support for up to 31 devices per port. Coupled with this software, it could make for a highly efficient DSLAM. ----- Original Message ----- From: "Alex Zeffertt" <redacted> Sent: Monday, January 26, 2004 3:59 PM Subject: Re: [Linux-ATM-General] Announcement: MPHY now supported in mpc860sarquoted
It is currently only supported in SAR mode, and in that mode there is an upper limit of 4 UTOPIA phys. However, there's no reason that support can't be added for MPHY in ESAR mode - in which the limit is 31 phys. I suspect that adding such support would be easier now that Rodolfo has done most of the work. PS I'm not the expert on this. Rodolfo's sourceforge username is "zaigor". On Mon, 2004-01-26 at 13:51, Gilad Rom wrote:quoted
This is very exciting news! (well, for me it is) How many PHY's in parallel are we talking about here? ----- Original Message ----- From: "Alex Zeffertt" <redacted> Sent: Monday, January 26, 2004 1:41 PM Subject: [Linux-ATM-General] Announcement: MPHY now supported in mpc860sarquoted
Just a quick note to say that multi-phy is now supported by the mpc860sar ATM driver, thanks to a patch by Rodolfo Giometti. Page: http://sourceforge.net/projects/mpc860sar/
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
From: Alex Zeffertt <hidden>
Date: 2004-02-05 13:43:55
Zoran I wouldn't imagine that the patch would apply to the mpc8260 driver and work. However, it would probably be useful to look at it for pointers if you were thinking of porting MPHY support to the mpc8260. BTW, to get the patch try cvs -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/mpc860sar checkout -A atm # Top of tree is now MPHY cd atm cvs -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/mpc860sar diff -u -r single-utopia-phy # compare with SPHY branch Alex On Thu, 2004-02-05 at 12:54, Zoran Stojsavljevic wrote:
Quick question to you all... I walked through Pete's 8260 ATM driver, and I saw (as far as I can understand) that Pete's driver is set to support single PHY mode. So, the question here is: do we need Rodolfo Giometti's patch to be applied to mpc8260 ATM driver? It is obvious that different set-up should be applied for mpc8260 ATM driver MPHY mode anyway... Thank you for answers in advance. Regards, Zoran Stojsavljevic DKTS Pupin Telecom ----- Original Message ----- From: "Gilad Rom" <redacted> To: "Alex Zeffertt" <redacted> Cc: <redacted>; [off-list ref] Sent: Monday, January 26, 2004 3:03 PM Subject: Re: [Linux-ATM-General] Announcement: MPHY now supported inmpc860sarquoted
Okay. Thanks. And now for my next question - Do you think the driver should run on the 82xx family of chips? (e.g. 8260 and the likes) these guys have 2 Utopia-II ports with support for up to 31 devices per port. Coupled with this software, it could make for a highly efficient DSLAM. Gilad. ----- Original Message ----- From: "Alex Zeffertt" <redacted> To: "Gilad Rom" <redacted> Cc: <redacted>; [off-list ref] Sent: Monday, January 26, 2004 3:59 PM Subject: Re: [Linux-ATM-General] Announcement: MPHY now supported inmpc860sarquoted
It is currently only supported in SAR mode, and in that mode there is an upper limit of 4 UTOPIA phys. However, there's no reason that support can't be added for MPHY in ESAR mode - in which the limit is 31 phys. I suspect that adding such support would be easier now that Rodolfo has done most of the work. Alex PS I'm not the expert on this. Rodolfo's sourceforge username is "zaigor". On Mon, 2004-01-26 at 13:51, Gilad Rom wrote:quoted
This is very exciting news! (well, for me it is) How many PHY's in parallel are we talking about here? Thanks, Gilad. ----- Original Message ----- From: "Alex Zeffertt" <redacted> To: <redacted>; [off-list ref] Sent: Monday, January 26, 2004 1:41 PM Subject: [Linux-ATM-General] Announcement: MPHY now supported inmpc860sarquoted
quoted
quoted
Just a quick note to say that multi-phy is now supported by the mpc860sar ATM driver, thanks to a patch by Rodolfo Giometti. Page: http://sourceforge.net/projects/mpc860sar/ Alex
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
From: Zoran Stojsavljevic <hidden>
Date: 2004-08-05 09:09:24
Hello to all, I finally achieved multiphy mpc8260sar (with some limitations). The driver is able to support 8 PHYs (one PHY per unique priority). The driver is developed out of Peter's McCormick single PHY version. For some unknow reason I could NOT achieve MPHY support with only one priority (for example highest PRIority 0). In order to make MPHY to work correctly I assigned a unique priority per PHY. With 8 PHYs the mapping looks like: PHY0/PRIO0, PHY1/PRIO1... PHY7/PRIO7, eg. PHYx/PRIOx, where x is in range [0..7]! The another limitation is that I did NOT fix the VP range, eg. I am using only VP0 (one VP) with different VCs, where least three (3) significant bits of each VC assume the selected PHY. In other words, I am using 8 nas interfaces, and VCs (decimal radix) from 40 (0x28) to 47 (0x2F), where VC 40 is attached to PHY0, VC 41 to PHY1... VC47 to PHY7. While issuing ATM xmit command I am deriving least three significant bits of currently processed VC and I'm putting them to the COMM_INFO words (offset 0x86, field PHY#), described in section 30.14 of MPC8260 PowerQUICC II Family Reference Manual (Revision 1, date 05/2003). If you all find this info of (some) interest, I can do the patch (against latest version in CVS) so we can store this limited edition of the MPHY version under the mpc8260sar driver project. Best Regards, Zoran Stojsavljevic DKTS Pupin Telecom zoransto@dkts.co.yu ----- Original Message ----- From: "Alex Zeffertt" <redacted> Sent: Monday, January 26, 2004 1:41 PM Subject: Announcement: MPHY now supported in mpc860sar
Just a quick note to say that multi-phy is now supported by the mpc860sar ATM driver, thanks to a patch by Rodolfo Giometti.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/