In message [off-list ref] you wrote:
I'm porting u-boot-0.4.0 to my WindRiver MDP PRO board now,some
addressing specifications are listed below.I choose the
You asked the very same question just two hours ago on the
U-Boot-users mailing list.
Please read and digest my reply first before sending the same message
to more mailing lists.
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de
"UNIX was not designed to stop you from doing stupid things, because
that would also stop you from doing clever things." - Doug Gwyn
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Hi Dear Wolfgang, Eugene and whole group,
We like to use the pci bus on the 440GP as an adapter interface, not a
host interface. Is there any support for this mode in the linuxppc kernel?
Your input is highly appreciated,
Many thanks in advance,
--Jeff
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
I work for Titan Corporation. Our division made a PCI
board out of the PPC440GP and uses its PCI interface
to talk to either Solaris or Windows Host. We have
embedded linux 4.10.17 running on it.
You can contact Titan Sales at 858-527-4100 or
858-231-4100. Maybe you can get it as a reference
board for your design although we are not really into
the reference design market.
--Khai
--- "Jeff H. Zhong" <jeff@doremilabs.com> wrote:
Hi Dear Wolfgang, Eugene and whole group,
We like to use the pci bus on the 440GP as an
adapter interface, not a
host interface. Is there any support for this mode
in the linuxppc kernel?
Your input is highly appreciated,
Many thanks in advance,
--Jeff
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/