RE: using bdi2000 to debug ppcboot on mpc7455

Ok so with a bit of tongue and cheek.... To Quote Wolfgang from the 24th of
May 2001...

"Everybody listen: I _will_ mention this trick a 9th  time  for  free. The
10th person asking the same question will owe me a beer."

Does this mean that Q-ha Park owes Wolfgang a beer? ;-)

Rod

-----Original Message-----
From: Wolfgang Denk [mailto:wd@denx.de]
Sent: Wednesday, 1 October 2003 9:35 a.m.
To: Q-ha Park
Cc: linuxppc-embedded@lists.linuxppc.org
Subject: Re: using bdi2000 to debug ppcboot on mpc7455


In message <005e01c383f2$65430080$2a21a8c0@qha> you wrote:

quoted

Thanks a lot for your very informative reply; it helped me greatly and I
can finally play with breakpoints. Although I failed to set the
breakpoint at after_reloc but the point right before boart_init_r.

For debugging U-Boot / PPCBoot after relocation see
http://www.denx.de/twiki/bin/view/DULG/DebuggingUBoot#Section_9.1.2.

Best regards,

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
Heavier than air flying machines are impossible.
                    -- Lord Kelvin, President, Royal Society, c. 1895

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/