I got the linuxppc_2_4_devel tree at http://ppc.bkbits.net/ to boot with no
problem. The compiler I used was ELDK. The config file was
arch/ppc/configs/rpxcllf_defconfig.
-----Original Message-----
From: Jan Dominik Baranski [mailto:jdb2@ece.msstate.edu]
Sent: Wednesday, September 03, 2003 6:02 PM
To: linuxppc-embedded@lists.linuxppc.org
Subject: Kernel hangs on EP862-1.1 during boot
Hello all,
I'm having trouble getting a 2.4.22 kernel to boot on an Embedded Planet
EP862-1.1 board (based on an MPC860). I get this:
---
Loaded addresses 00400000 through 0049FFFF.
>go
[Go 00400000]
loaded at: 00400000 004A31F4
relocated to: 00180000 002231F4
board data at: 00220128 00220144
relocated to: 001862E0 001862FC
zimage at: 001868A0 0021F3EC
avail ram: 00224000 01000000
Linux/PPC load: console=ttyS0,9600
Uncompressing Linux...done.
Now booting the kernel
<just hangs here>
---
I've searched the archives, but no one seems to have this board/problem
combination. I've made sure the watchdog timer is disabled and that the
IMMR (0xfa200000) is set correctly. Being pretty new to this, I don't
really know where else to look. Maybe something related to m8xx_board_info?
The thing is, I've been able to get an old kernel (2.4.7) from Timesys
that's configured for an RPX Classic board to boot correctly. I just
can't figure out what they may have done that I haven't.
Any suggestions??
Thanks
-Jan
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Thanks for the help. Until some of you mentioned it, I didn't even think
the linuxppc kernels were any different from the kernel.org
kernel+patches. After some wrestling with BitKeeper, I've got
linuxppc_2_4_devel working great.
Thanks again
-Jan
Steven Blakeslee wrote:
I got the linuxppc_2_4_devel tree at http://ppc.bkbits.net/ to boot with no
problem. The compiler I used was ELDK. The config file was
arch/ppc/configs/rpxcllf_defconfig.
-----Original Message-----
From: Jan Dominik Baranski [mailto:jdb2@ece.msstate.edu]
Sent: Wednesday, September 03, 2003 6:02 PM
To: linuxppc-embedded@lists.linuxppc.org
Subject: Kernel hangs on EP862-1.1 during boot
Hello all,
I'm having trouble getting a 2.4.22 kernel to boot on an Embedded Planet
EP862-1.1 board (based on an MPC860). I get this:
---
Loaded addresses 00400000 through 0049FFFF.
>go
[Go 00400000]
loaded at: 00400000 004A31F4
relocated to: 00180000 002231F4
board data at: 00220128 00220144
relocated to: 001862E0 001862FC
zimage at: 001868A0 0021F3EC
avail ram: 00224000 01000000
Linux/PPC load: console=ttyS0,9600
Uncompressing Linux...done.
Now booting the kernel
<just hangs here>
---
I've searched the archives, but no one seems to have this board/problem
combination. I've made sure the watchdog timer is disabled and that the
IMMR (0xfa200000) is set correctly. Being pretty new to this, I don't
really know where else to look. Maybe something related to m8xx_board_info?
The thing is, I've been able to get an old kernel (2.4.7) from Timesys
that's configured for an RPX Classic board to boot correctly. I just
can't figure out what they may have done that I haven't.
Any suggestions??
Thanks
-Jan
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/