Hello all,
I'm having trouble getting a 2.4.22 kernel to boot on an Embedded Planet
EP862-1.1 board (based on an MPC860). I get this:
---
Loaded addresses 00400000 through 0049FFFF.
go
[Go 00400000]
loaded at: 00400000 004A31F4
relocated to: 00180000 002231F4
board data at: 00220128 00220144
relocated to: 001862E0 001862FC
zimage at: 001868A0 0021F3EC
avail ram: 00224000 01000000
Linux/PPC load: console=ttyS0,9600
Uncompressing Linux...done.
Now booting the kernel
<just hangs here>
---
I've searched the archives, but no one seems to have this board/problem
combination. I've made sure the watchdog timer is disabled and that the
IMMR (0xfa200000) is set correctly. Being pretty new to this, I don't
really know where else to look. Maybe something related to m8xx_board_info?
The thing is, I've been able to get an old kernel (2.4.7) from Timesys
that's configured for an RPX Classic board to boot correctly. I just
can't figure out what they may have done that I haven't.
Any suggestions??
Thanks
-Jan
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Hi Jan,
What you could do is check of your board data that is passed to the kernel
is still valid in start_kernel.
Also, are you sure you have the kernel uart driver properly configured
(i.e. it works but you don't see anything)
Jaap-Jan
Jan Dominik Baranski wrote:
Hello all,
I'm having trouble getting a 2.4.22 kernel to boot on an Embedded Planet
EP862-1.1 board (based on an MPC860). I get this:
---
Loaded addresses 00400000 through 0049FFFF.
>go
[Go 00400000]
loaded at: 00400000 004A31F4
relocated to: 00180000 002231F4
board data at: 00220128 00220144
relocated to: 001862E0 001862FC
zimage at: 001868A0 0021F3EC
avail ram: 00224000 01000000
Linux/PPC load: console=ttyS0,9600
Uncompressing Linux...done.
Now booting the kernel
<just hangs here>
---
I've searched the archives, but no one seems to have this board/problem
combination. I've made sure the watchdog timer is disabled and that the
IMMR (0xfa200000) is set correctly. Being pretty new to this, I don't
really know where else to look. Maybe something related to m8xx_board_info?
The thing is, I've been able to get an old kernel (2.4.7) from Timesys
that's configured for an RPX Classic board to boot correctly. I just
can't figure out what they may have done that I haven't.
Any suggestions??
Thanks
-Jan
--
J.G.J. Boor Anton Philipsweg 1
Software Engineer 1223 KZ Hilversum
AimSys bv tel. +31 35 689 1941
Postbus 2194, 1200 CD Hilversum mailto:jjboor@aimsys.nl
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/