# RE: Can i use BDI2000 to debug "U-Boot" in Flash memory ?

- From: Steven Blakeslee \<hidden\>
- Date: 2003-08-26 13:02:20 
- List: linuxppc-dev
- Page: https://ratatoskr.run/linuxppc-dev/2003/08/9389502
- Thread: https://ratatoskr.run/linuxppc-dev/2003/08/9389502/t.md

```text

If you are debugging the code from FLASH make sure you use hardware break
points, software break points will not work.

-----Original Message-----
From: Qsyang [mailto:<redacted>]
Sent: Monday, August 25, 2003 9:21 PM
To: <redacted>
Subject: Can i use BDI2000 to debug "U-Boot" in Flash memory ?



 Hi:
 i am new to this, i am porting U-Boot to my MPC852 board. First of
 all i programed the monitor code to Flash memory through BDI2000, i
 just want getting into a normal "C" debug enviroment,is that right? or
 should i place it into Sdram?(some guy told me,but it has problem,maybe
 my fault) any help would be appreciated !

¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡Qsyang
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡yangqs@163.com
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡2003-08-26


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
```