# Re: AW: Serial Console at MPC8xx SCC1?

- From: Steven Scholz \<hidden\>
- Date: 2003-08-14 10:19:41 
- List: linuxppc-dev
- Page: https://ratatoskr.run/linuxppc-dev/2003/08/9389449
- Thread: https://ratatoskr.run/linuxppc-dev/2003/08/9389448/t.md

```text

Alex,

> Yes this works very well!
> Be sure you have defined CONFIG_SERIAL_CONSOLE_PORT for your uart.c! If you
> use SMC1+2 for uarts, define it as 2!

Yeah. I found that one!

I was under the (stupid) impression that it would be enough to just
pass console=ttyS2,115200 to the linux kernel.

I think it wouldn't be too hard to make it work like that. (I think
there'S just too much hardcoded...) Maybe I give it a try after my
vacations...

Thanks anyway!

Steven


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
```