Dear Matthew,
in message [off-list ref] you wrote:
Has anyone had any success using an MPC8245 and a Philips PCF8563 real
time clock in linux? Everything works in U-Boot but I can not get
everything working in linux.
Not with a MPC8245, but with MPC8240 (on CU824 board), MPC8250 (on
PM825 board), and MPC8260 CPUs (on PM826 and CPU86 boards).
Obviously it has a transfer error, but I am curious if anyone has any
experiences with the same situation. Anyone have any ideas?
Works fine here.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de
I read part of it all the way through.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Do any of the boards you mentioned use the same i2c-adap driver that I
mentioned I was using for my board? Is there a better i2c-adap driver
for an MPC8245 board? I think the i2c driver for my board is the
culprit, not the driver for the real time clock. As always all help is
appreciated.
Thanks,
Matthew
On Thu, 2003-07-24 at 17:26, Wolfgang Denk wrote:
Dear Matthew,
in message [off-list ref] you wrote:
quoted
Has anyone had any success using an MPC8245 and a Philips PCF8563 real
time clock in linux? Everything works in U-Boot but I can not get
everything working in linux.
Not with a MPC8245, but with MPC8240 (on CU824 board), MPC8250 (on
PM825 board), and MPC8260 CPUs (on PM826 and CPU86 boards).
quoted
Obviously it has a transfer error, but I am curious if anyone has any
experiences with the same situation. Anyone have any ideas?
Works fine here.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de
I read part of it all the way through.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/