Kernel 2.4.21-ben2 does not boot on Rev 1 Xserve

Hello,

I tried to upgrade the kernel on our Xserve to 2.4.21-ben2 which I just
downloaded from source.mvista.com with rsync.

The bootup messages scroll by quite quickly, but if I'm not mistaken,
the IDE driver announced the following:

PDC20270: neither IDE port enabled (BIOS)

and fails to boot because it can't see the disks.

The computer works fine with 2.4.20-ben1, which I seem to have installed
on February 18 this year.

--
Atro Tossavainen (Mr.)               / The Institute of Biotechnology at
Systems Analyst, Techno-Amish &     / the University of Helsinki, Finland,
+358-9-19158939  UNIX Dinosaur     / employs me, but my opinions are my own.
< URL : http : / / www . helsinki . fi / %7E atossava / >

File attachments NOT welcome unless agreed to beforehand.

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

On Mon, 2003-07-07 at 13:46, Atro Tossavainen wrote:

Hello,

I tried to upgrade the kernel on our Xserve to 2.4.21-ben2 which I just
downloaded from source.mvista.com with rsync.

The bootup messages scroll by quite quickly, but if I'm not mistaken,
the IDE driver announced the following:

PDC20270: neither IDE port enabled (BIOS)

and fails to boot because it can't see the disks.

Did you enable CONFIG_PDC202XX_FORCE ? (Also called
"Special FastTrack Feature"). This option is needed for the Promise
controller on the Xserve motherboard.

Ben.


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/