RE: System crash in kernel_thread

It is still there with a BDI start.

I experienced a similar problem with my 860 based board.
The solution was in DER (Debug Enable Register) configured by the BDI.
I had to remove a bit, I just don't remember which one.

--------------------------------------------
 Jean-Denis Boyer, Software Designer
 M5T Centre d'Excellence en Télécom Inc.
 4283 Garlock Street
 Sherbrooke (Québec)
 J1L 2C8  CANADA
 (819)829-3972 x241
--------------------------------------------

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

 Hello,

 I started using bdi2000 with gdb.
I run gdb on Pentium PC.
The target is Sandpoint X3 with Altimus MPC755 processor board.
I found some flags in "kernel hacking" menu.
Which should I turn on?
   Magic SysRq key, Include kgdb kernel debugger, Include xmon kernel
debugger, Include BDI-2000 user context switcher, ...

 I switched from Codewarrior to GDB recently.
I'm not good at remote debugging with GDB.
I'll appreciate your help.

 Dong-In


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/