what 's wrong with the kernel booting?
From: chendong <hidden>
Date: 2003-05-13 08:17:56
hi,all I port uboot0.2.0 in my 405Gpr board.But I got some problems when booting kernel.Have anyone gave some advice? Thanks wood tftp 0x200000 ENET Speed is 100 Mbps - FULL duplex connection ARP broadcast 1 Got good ARP - start TFTP TFTP from server 192.168.0.83; our IP address is 192.168.0.2 Filename 'zImage.treeboot'. Load address: 0x200000 Loading: ################################################################# ############################################## done Bytes transferred = 568052 (8aaf4 hex) => tfp 0x100000 ENET Speed is 100 Mbps - FULL duplex connection ARP broadcast 1 Got good ARP - start TFTP TFTP from server 192.168.0.83; our IP address is 192.168.0.2 Filename 'zImage.treeboot'. Load address: 0x100000 Loading: *################################################################# ########## done Bytes transferred = 379656 (5cb08 hex) => bootm 0x100000 0x200000 ## Booting image at 00100000 ... Image Name: Powerpc Linux Kernel Created: 2003-05-09 15:01:24 UTC Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 379592 Bytes = 370.7 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Current stack ends at 0x00F8F580 => set upper limit to 0x00800000 ## cmdline at 0x007FFC00 ... 0x007FFC0D bd address = 0x00F8FF90 memstart = 0x00000000 memsize = 0x01000000 flashstart = 0xFFF80000 flashsize = 0x00080000 flashoffset = 0x00040000 sramstart = 0x00000000 sramsize = 0x00000000 bootflags = 0x7FFFFF00 procfreq = 400 MHz plb_busfreq = 100 MHz pci_busfreq = 33.333 MHz ethaddr = 00:D0:59:B8:36:C0 IP addr = 192.168.0.2 baudrate = 9600 bps ## Loading RAMDisk Image at 00200000 ... Image Name: Simple Ramdisk-Image Created: 2001-05-13 10:49:23 UTC Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 567988 Bytes = 554.7 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## initrd at 0x00200040 ... 0x0028AAF3 (len=567988=0x8AAB4) Loading Ramdisk to 00f04000, end 00f8eab4 ... OK ## Transferring control to Linux (at address 00000000) ... id mach(): done MMU:enter MMU:hw init MMU:mapin MMU:mapin_ram done MMU:setio MMU:exit setup_arch: enter setup_arch: bootmem arch: exit ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/