RE: kernel boot on mpc8245, internal UART

To know witch physical uart is mapped to which STTY, you must see in the
kernel the sanpoint_serial.h file in /arch/platform.
And to know whitch one is used by Linux at startup /etc/inittab.

-----Original Message-----
From: emanuel stiebler [mailto:emu@ecubics.com]
Sent: Wednesday, March 05, 2003 10:36 PM
To: linux-emb
Subject: Re: kernel boot on mpc8245, internal UART

emanuel stiebler wrote:

quoted

I have a board which is close to Sandpoints mpc8245 cpu board.
(using internal DUARTs, EPIC_MODE_SERIAL)

Trying to figure out what is going wrong, I tried to locate the driver
for the internal DUART of the MPC8245 ...

So, probably a stupid question, but where is the link/information, or
where do I provide it, that the MPC8245 should use the internal UART as
a console on linux ?

Thanks a lot in advance, but I guess I got lost ...


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/