NFS and ram filesystems

Dear friends,

We are finalizing our project on a custom 8260 board and as suggested in
many "Linux HOWTO" we are trying to move from NFS to ram filesystem.
Actually we have burned the flash with both kernel and ramdisk images and
modified the initial bootargs variable to indicate where to find the two
images.
At this point all is working, but the ramdisk image is obviously too small
to support the whole application (Flash size cannot be larger than 2Mbytes).

The question is:
How can I boot the board by using PPCboot, mount initially the NFS
filesystem, load a new big ramdisk image and finally remount root on
ramdisk?
Any help would be appreciated.

many thanks

Gianfranco


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

On Thu, 2003-02-20 at 19:19, Ing.Gianfranco Morandi wrote:

The question is:
How can I boot the board by using PPCboot, mount initially the NFS
filesystem, load a new big ramdisk image and finally remount root on
ramdisk?

??? say what ??

You just have to explain this a bit more what are you really trying to
do? if you have nfsroot why switch over to a ramdisk.

If you want to test the system you have in a ramdisk there is much
easier ways.


--
Kenneth Johansson
Ericsson AB                       Tel: +46 8 719 70 20
Tellusborgsvägen  94              Fax: +46 8 719 29 45
126 25 Stockholm                  ken@switchboard.ericsson.se


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/