RE: Need IDE for embedded Linux project

I agree with what hs been said except for one thing use tight VNC I have
found it to be faster than the original VNC.  It is well supported and works
very well the web site is www.tightvnc.com it is still open source.


 -----Original Message-----
From: 	Jerry Van Baren [mailto:gerald.vanbaren@smiths-aerospace.com]
Sent:	Wednesday, 22 January 2003 10:08 a.m.
To:	linuxppc-embedded@lists.linuxppc.org
Subject:	Re: Need IDE for embedded Linux project



Check out VNC http://www.uk.research.att.com/vnc/ -- it is an open software
"PCanywhere" type program that works very well under linux and quite well
under Windows.  Exceed (X windows on Microsoft Windows) is a nice program
but pretty expensive.

gvb


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

quoted

quoted

quoted

quoted

"Rod" == Rod Boyce [off-list ref] writes:

    Rod> I agree with what hs been said except for one thing use tight
    Rod> VNC I have found it to be faster than the original VNC.  It
    Rod> is well supported and works very well the web site is
    Rod> www.tightvnc.com it is still open source.

Tight VNC works well.  But you can also check out www.realvnc.com for
a new release of "official" VNC, which has various protocol
enhancements that make it comparable to tight vnc.

 - Roland

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/