ppcboot, ebony , change baudrate function has bug.

when you set a new baudrate,

=> setenv  baudrate 38400
## Switch baudrate to 38400 bps and press ENTER ...


it will hang .

I find a way  to avoid it.
first, clear the baudrate with "setenv baudrate=xxxx"----it's wrong ,

but it can clear it.

and then "setenv baudrate 38400"
"saveenv"
reset and change the hyperterminal baudrate, it's run , and ok.

because it doesn't invoke the baudrate changing function.

                    edmoon

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/