Re: MacRaigor Wiggler

Wolfgang Denk wrote:

In message [off-list ref] y
ou wrote:

quoted

Through away your Wiggler and get a BDI2000.  They don't support the MMU,
they are slow and only work under windows.

This is not exactly correct.  IIRC  the  BDM4GDB  project  has  added
support to drive the wiggler, too, including MMU support.

Also, I think it should be said that for $150, the wiggler is a great
bargain and very useful for doing initial bringup.  It's certainly
capable of programming the dram (UTM) and getting initial boot rom
code going, even if you have to use a Windows machine to do it.

But the BDI2000 is clearly the superior tool.

True (and I love the bdi2000), but it's 16x the cost, so each tool has
a place...

-brad

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Hi All

Can we use Riscwatcg Probe from IBM to debug PPCboot code.

Thanking you in advance
Regards
Aman


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Aman,

As long as PPCBOOT does note do anything with the DBCR registers,
the answer is yes.

Chip

Aman wrote:

Hi All

Can we use Riscwatcg Probe from IBM to debug PPCboot code.

Thanking you in advance
Regards
Aman




.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

On Sat, 2002-10-19 at 20:48, Aman wrote:

Hi All

Can we use Riscwatcg Probe from IBM to debug PPCboot code.

yes and no. I could never get riscwatch software to do symbolic
debugging.

--
Kenneth Johansson
Ericsson AB                       Tel: +46 8 404 71 83
Borgafjordsgatan 9                Fax: +46 8 404 72 72
164 80 Stockholm                  kenneth.johansson@etx.ericsson.se


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/