On Thu, Sep 19, 2002 at 02:24:28PM +0200, Stefano Coluccini wrote:
Hi all,
I'm trying to run the linux kernel (2.4.18-pre3) on a Motorola MCPN765
with the 7410 processor, but immediately after the tftp transfer (with nbo)
the kernel stops with an illegal instruction. I've used correctly the same
kernel with a MCPN765 with the 750 processor for a long time.
Anyone of you knows the origin of the problem ?
Yes, when you got your new MCPN765 board you forgot to enable the
Network PReP boot option in 'ENV'.
Regards,
--
Matt Porter
porter@cox.net
This is Linux Country. On a quiet night, you can hear Windows reboot.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Thank you very much !!!
I always forget the ENV command ...
-----Messaggio originale-----
Da: Matt Porter [mailto:porter@cox.net]
Inviato: giovedi 19 settembre 2002 14.55
A: Stefano Coluccini
Cc: Linuxppc-Embedded
Oggetto: Re: MCPN765 - 7410 - Illegal instruction
On Thu, Sep 19, 2002 at 02:24:28PM +0200, Stefano Coluccini wrote:
quoted
Hi all,
I'm trying to run the linux kernel (2.4.18-pre3) on a Motorola MCPN765
with the 7410 processor, but immediately after the tftp
transfer (with nbo)
quoted
the kernel stops with an illegal instruction. I've used
correctly the same
quoted
kernel with a MCPN765 with the 750 processor for a long time.
Anyone of you knows the origin of the problem ?
Yes, when you got your new MCPN765 board you forgot to enable the
Network PReP boot option in 'ENV'.
Regards,
--
Matt Porter
porter@cox.net
This is Linux Country. On a quiet night, you can hear Windows reboot.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/