3 messages, 2 authors, 2002-08-23 · open the first message on its own page
From: Xiaogeng (Shawn) Jin <hidden>
Date: 2002-08-22 20:24:50
I noticed that only LXT970 and 971 are supported in the lastest kernel distribution from DENX. But the comments in fec.c say "includes support for following PHYs: QS6612, LXT970, LXT971/2". Does it mean that LXT972 can use 971's driver? If not, basically what kind of modification is needed? Thanks. - Shawn. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
From: Xiaogeng (Shawn) Jin <hidden>
Date: 2002-08-22 23:32:41
for following PHYs: QS6612, LXT970, LXT971/2". Does it mean that LXT972 can use 971's driver? If not, basically what kind of modification is needed? Thanks.
After looking into LXT971/972 datasheets, I believe LXT972 can use 971's driver. Thanks. - Shawn. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
From: Stephan Linke <hidden>
Date: 2002-08-23 09:04:02
Hi, I'm using the LXT971 settings for an LXT972 on a 857 board and It's running fine... Regards, Stephan (see my response to "MPC857T FEC/MII failure" :o))
-----Original Message----- From: owner-linuxppc-embedded@lists.linuxppc.org [mailto:owner-linuxppc-embedded@lists.linuxppc.org]On Behalf Of Xiaogeng (Shawn) Jin Sent: Donnerstag, 22. August 2002 22:25 To: linuxppc-embedded@lists.linuxppc.org Subject: fast ethernet LXT972A support I noticed that only LXT970 and 971 are supported in the lastest kernel distribution from DENX. But the comments in fec.c say "includes support for following PHYs: QS6612, LXT970, LXT971/2". Does it mean that LXT972 can use 971's driver? If not, basically what kind of modification is needed? Thanks. - Shawn.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/