Re: 440 PCI adapter card DMA question

[Please, always start a new mail when starting a new thread.  Don't
 reply to an old one and change the subject, it messes up people
 using mailbox threading.]

On Fri, Aug 16, 2002 at 11:39:15AM -0700, Khai Trinh wrote:

On one of your response email to me, you said the
440GP maps PCI<->PLB 1:1 and I can use the PCI bus
address directly as a PLB address to program the 440GP
DMA controller.

The thing is that the DMA high and low register only
allows 36-bit programming whereas the PCI bus address
given to me by the Host is 64-bit.

I was answering with respect to the Ebony PCI-X host bridge
configuration.

Don't I have to manually setup the PCI-PLB mapping
before I can program the DMA controller? OR the 440
kernel has already handle that?

The PCI-X host bridge configuration in the Ebony port is
implemented for host operation only (i.e. it has set up
windows and controls BAR assignment within a controlled
PCI address space).  If you need a special translation
for your particular adapter application, you will need
to modify that setup accordingly.

Regards,
--
Matt Porter
porter@cox.net
This is Linux Country. On a quiet night, you can hear Windows reboot.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/