Jim,
4. Due to custom board running in NFS envirment . It's cost
some throughput.. now I trying test it without NFS envirment.
If I got more information I will post again.
Send your incoming file to /dev/null to eliminate the NFS cost.
Example:
ftp> get bigfile /dev/null
Then your measure with FTP will be more precise.
Regards,
--------------------------------------------
Jean-Denis Boyer, B.Eng., System Architect
Mediatrix Telecom Inc.
4229 Garlock Street
Sherbrooke (Quebec)
J1L 2C8 CANADA
(819)829-8749 x241
--------------------------------------------
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Hi Jean-denis:
It's about 860KBps , It's a amaze..
---------------------------------------------
ftp> get xbc /dev/null
local: /dev/null remote: xbc
200 PORT command successful.
150 Opening BINARY mode data connection for xbc (13172736 bytes).
226 Transfer complete.
13172736 bytes received in 14.92 secs (862.4 kB/s)
Thanks
-----Original Message-----
From: Jean-Denis Boyer [mailto:jdboyer@mediatrix.com]
Sent: Thursday, July 18, 2002 4:12 AM
To: 'Jim Lin'
Cc: linuppc
Subject: RE: Poor 8xx SCC Ethernet mode performence..
Jim,
4. Due to custom board running in NFS envirment . It's cost
some throughput.. now I trying test it without NFS envirment.
If I got more information I will post again.
Send your incoming file to /dev/null to eliminate the NFS cost.
Example:
ftp> get bigfile /dev/null
Then your measure with FTP will be more precise.
Regards,
--------------------------------------------
Jean-Denis Boyer, B.Eng., System Architect
Mediatrix Telecom Inc.
4229 Garlock Street
Sherbrooke (Quebec)
J1L 2C8 CANADA
(819)829-8749 x241
--------------------------------------------
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/