I got the following boot up problem with 2.4 devel
kernel when booting on the IBM ebony board:
Sending BOOTP requests . OK
IP-Config: Got BOOTP answer from 199.254.9.151, my
address is 199.254.9.207
IP-Config: Complete:
device=eth0, addr=199.254.9.207,
mask=255.255.255.0, gw=199.254.9.254,
host=199.254.9.207, domain=, nis-domain=(none),
bootserver=199.254.9.151,
rootserver=199.254.9.151, rootpath=/projects/hard
hat/khai/devkit/ppc/405/target
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 199.254.9.151
Root-NFS: Unable to get nfsd port number from server,
using default
Looking up port of RPC 100005/1 on 199.254.9.151
Root-NFS: Unable to get mountd port number from
server, using default
mount: server 199.254.9.151 not responding, timed out
Root-NFS: Server returned error -5 while mounting
/projects/hardhat/khai/devkit/
ppc/405/target
VFS: Unable to mount root fs via NFS, trying floppy.
kmod: failed to exec /sbin/modprobe -s -k
block-major-2, errno = 2
VFS: Cannot open root device "" or 02:00
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 02:00
<0>Rebooting in 180 seconds..
It didn't seem to like the root filesystem directory I
specified on the Host. Where should I point the fs
directory for it in the Ebony kernel directory? I just
arbitrarily pointed it to the 405 target file system
dir existed on my Host system.
Thanks,
--Khai
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
I got the following boot up problem with 2.4 devel
kernel when booting on the IBM ebony board:
Sending BOOTP requests . OK
IP-Config: Got BOOTP answer from 199.254.9.151, my
address is 199.254.9.207
IP-Config: Complete:
device=eth0, addr=199.254.9.207,
mask=255.255.255.0, gw=199.254.9.254,
host=199.254.9.207, domain=, nis-domain=(none),
bootserver=199.254.9.151,
rootserver=199.254.9.151, rootpath=/projects/hard
hat/khai/devkit/ppc/405/target
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 199.254.9.151
Root-NFS: Unable to get nfsd port number from server,
using default
Looking up port of RPC 100005/1 on 199.254.9.151
Root-NFS: Unable to get mountd port number from
server, using default
mount: server 199.254.9.151 not responding, timed out
Root-NFS: Server returned error -5 while mounting
/projects/hardhat/khai/devkit/
ppc/405/target
VFS: Unable to mount root fs via NFS, trying floppy.
kmod: failed to exec /sbin/modprobe -s -k
block-major-2, errno = 2
VFS: Cannot open root device "" or 02:00
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 02:00
<0>Rebooting in 180 seconds..
It didn't seem to like the root filesystem directory I
specified on the Host. Where should I point the fs
directory for it in the Ebony kernel directory? I just
arbitrarily pointed it to the 405 target file system
dir existed on my Host system.
I would recomend you check on the server side in /var/log/messages what nfsd
is fussing about - did you export it with (rw,no_root_squash) ?? if not then
uid 0 becommes uid -1 (nobody) and will have access/perm problems.
hofrat
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Thanks, Der Her...I got the NFS problem now. But my
question is the 440GP root filesystem. Where should I
point the fs directory for it in the Ebony kernel
directory? I just arbitrarily pointed it to a canned
target file system dirextory existed on my Host
system.
Thanks,
--Khai
--- Der Herr Hofrat <der.herr@mail.hofr.at> wrote:
quoted
I got the following boot up problem with 2.4 devel
kernel when booting on the IBM ebony board:
Sending BOOTP requests . OK
IP-Config: Got BOOTP answer from 199.254.9.151, my
address is 199.254.9.207
IP-Config: Complete:
device=eth0, addr=199.254.9.207,
mask=255.255.255.0, gw=199.254.9.254,
host=199.254.9.207, domain=,
nis-domain=(none),
quoted
bootserver=199.254.9.151,
rootserver=199.254.9.151, rootpath=/projects/hard
hat/khai/devkit/ppc/405/target
NET4: Unix domain sockets 1.0/SMP for Linux
NET4.0.
quoted
Looking up port of RPC 100003/2 on 199.254.9.151
Root-NFS: Unable to get nfsd port number from
server,
quoted
using default
Looking up port of RPC 100005/1 on 199.254.9.151
Root-NFS: Unable to get mountd port number from
server, using default
mount: server 199.254.9.151 not responding, timed
out
quoted
Root-NFS: Server returned error -5 while mounting
/projects/hardhat/khai/devkit/
ppc/405/target
VFS: Unable to mount root fs via NFS, trying
floppy.
quoted
kmod: failed to exec /sbin/modprobe -s -k
block-major-2, errno = 2
VFS: Cannot open root device "" or 02:00
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on
02:00
quoted
<0>Rebooting in 180 seconds..
It didn't seem to like the root filesystem
directory I
quoted
specified on the Host. Where should I point the fs
directory for it in the Ebony kernel directory? I
just
quoted
arbitrarily pointed it to the 405 target file
system
quoted
dir existed on my Host system.
I would recomend you check on the server side in
/var/log/messages what nfsd
is fussing about - did you export it with
(rw,no_root_squash) ?? if not then
uid 0 becommes uid -1 (nobody) and will have
access/perm problems.
hofrat
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/