Re: not enough memory for SELF!?

In message [off-list ref] you wrote:

I started playing around with Wolfgang's SELF and busybox.

For now I have only 8MB RAM.

Add more :-)

When I try to telnet into my board I get

/ # Out of Memory: Killed process 13 (sh).
Out of Memory: Killed process 1 (init).
The system is going down NOW !!

I am using Linux-2.4.4-2002-02-14 from ftp.denx.de with TQM860L_config.

What can I do?

There are several options:

* Add more RAM (which is obviously the  simplest  solution  from  the
  perspective of a software developer)

* Reduce the size of the ramdisk - it defualts to  4  MB,  but  AFAIR
  only about 2.5 MB are used

* Don't use a ramdisk at all, but instead put  your  root  filesystem
  into a cramfs or JFFS2 filesystem

* Optimize the kernel  configuration  by  throwing  out  drivers  and
  filesystems  you  don't  need; the default configurations is _very_
  generic (with NFS, ext2, cramfs, JFFS, JFFS2, msdos filesystems).

Hope it helps,

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
If this is a service economy, why is the service so bad?

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Thanks for your reply!

There are several options:

* Add more RAM (which is obviously the  simplest  solution  from  the
  perspective of a software developer)

I will!

* Reduce the size of the ramdisk - it defualts to  4  MB,  but  AFAIR
  only about 2.5 MB are used

How? My pRamdisk is only 955068 bytes large.

* Don't use a ramdisk at all, but instead put  your  root  filesystem
  into a cramfs or JFFS2 filesystem

Hmm? Is there a HOWTO for doing this?

Thanks,

Steven

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/