Problems running PING, Telnet

Hello,

We have a custom designed board G4 MPC7450 with GT64260 Galileo controller.
We have been able to port the Linux on this board. But we do have some
issues for which I will appreciate if some one could help me.

Implementation details:
-----------------------
We have used Mission Critical Linux 2.4.5-Pre 5 (derived from debian distro)
and PPCBoot 1.0.4 as our base versions. I used the file system meant for NFS
mount from the mission critical linux web site. We made necessary
modifications to the software to work on our custom design.

I am able to boot Linux successfully with a NFS mounted file system and a
Ramdisk (I could test upto 128MB size) based file system. But this was
possible only when I bypassed the /sbin/init and run the "Bash" shell
directly. I made changes to init/main.c to run the shell directly after
successful opening of the /dev/console. Bypassing of /sbin/init at boot time
is inevitable until we integrate a MPSC port based serial console driver
with our linux system. We have a crude one (emulates the low level UART
functions using MPSC) that just works.

We have the following difficulties:
                                   ----------
- PING command does not work
  The erro message I get is   "ping: unknown protocol icmp"

- Telnet program does not work which tells me that the service is unknown.
   The error message I get is "telnet: tcp/telnet: unknown service"

What can be the issue? I suspect if any of the boot script is not done. I
ran manually /etc/init.d/rcS and /etc/rc3.d/* (my inittab says run level 3)
from the bash prompt. This did not help to solve my above problem.

I assume that TCP/IP is fine because I have performed NFS mount of the root
file system and can access all the files. The booted OS seems to be stable
as I have run some complex Linux applications and also able to build new
Linux images.


With best regards,
Murali


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

On Tue, Feb 05, 2002 at 02:02:32PM -0800, murali nagarajan wrote:

                                   ----------
- PING command does not work
  The erro message I get is   "ping: unknown protocol icmp"

Do you have the libnss_* stuff in /lib? I think not having it is
the source of your problem.

- Telnet program does not work which tells me that the service is unknown.
   The error message I get is "telnet: tcp/telnet: unknown service"

This might be related to the above, but I'm not sure.

--
Jay Monkman	    The truth knocks on the door and you say "Go away, I'm
monkman@jump.net    looking for the truth," and so it goes away. Puzzling.
		     - from _Zen_and_the_Art_of_Motorcycle_Maintenance_

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/