RE: microcodepatch

I will apply this patch.
But the ethernet is crashing before I install the I2C driver.
(The I2C driver is compiled as a module).

K.D.

-----Original Message-----
From: Peter Desnoyers [mailto:<redacted>]
Sent: 24. október 2001 19:07
To: Kári Davíðsson
Cc: Linux Embedded ppc (E-mail)
Subject: Re: microcodepatch


The I2C driver doesn't work properly with the microcode patch - it
initializes tbptr and rbptr to 0, not r_tbase and r_rbase, and it uses
the INIT_TRX command (which the patched code doesn't support)
instead of
separate INIT_RX and INIT_TX.

You might want to try the attached minor patch, which works for us.

--
.....................................................................
 Peter Desnoyers            (781) 457-1165   pdesnoyers@chinook.com
 Chinook Communications     (617) 661-1979   pjd@fred.cambridge.ma.us
 100 Hayden Ave, Lexington MA 02421

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/