That's fine.. Can you change arch/ppc/boot/simple/head.S to something
like:
#if 0
/*
* Determine CPU type
...
bge _setup_L2CR
#endif
b _setup_6xx
Thanks for your advice.
I do on my x86 cpu :
make CROSS_COMPILE=powerpc-unknown-linux-gnu- ARCH=ppc znetboot
on my 5100 :
PPC6-Bug>nbo 0 0 ,,, zImage.pplus
Network Booting from: I82559, Controller 0, Device 0
Device Name: /pci@fe000000/pci8086,1209@e,0:0,0
Loading: zImage.pplus
Client IP Address = 192.168.120.38
Server IP Address = 192.168.120.35
Gateway IP Address = 0.0.0.0
Subnet IP Address Mask = 255.255.255.0
Boot File Name = zImage.pplus
Argument File Name =
Network Boot File load in progress... To abort hit <BREAK>
Bytes Received =&700757, Bytes Loaded =&700757
Bytes/Second =&700757, Elapsed Time =1 Second(s)
Exception: Program (Illegal Instruction)
SRR0 =001F0000 SRR1 =00083040 Vector-Offset =00700
IP =001F0000 MSR =00003040 CR =00000000 FPSCR =00000000
R0 =00000000 R1 =03F00000 R2 =00000000 R3 =00000000
R4 =00000000 R5 =49504C01 R6 =00007000 R7 =001F0000
R8 =03F0CF54 R9 =03F0CD54 R10 =03F0CD60 R11 =03F0CE54
R12 =03F0CE54 R13 =00000000 R14 =00000000 R15 =00000000
R16 =00000000 R17 =00000000 R18 =00000000 R19 =00000000
R20 =00000000 R21 =00000000 R22 =00000000 R23 =00000000
R24 =00000000 R25 =00000000 R26 =00000000 R27 =00000000
R28 =00000000 R29 =00000000 R30 =00000000 R31 =00000000
SPR0 =00000000 SPR1 =00000000 SPR8 =00000000 SPR9 =00000000
001F0000 00040000 WORD $00040000
I have done the modification you advised me and also an other one (to
compile :-(
Any idea ?
--
33 (0) 1 69 15 79 59
De chacun selon ses forces, a chacun selon ses besoins
On Fri, Aug 31, 2001 at 05:36:34PM +0200, Xavier Grave wrote:
quoted
That's fine.. Can you change arch/ppc/boot/simple/head.S to something
like:
#if 0
/*
* Determine CPU type
...
bge _setup_L2CR
#endif
b _setup_6xx
Thanks for your advice.
I do on my x86 cpu :
make CROSS_COMPILE=powerpc-unknown-linux-gnu- ARCH=ppc znetboot
on my 5100 :
PPC6-Bug>nbo 0 0 ,,, zImage.pplus
Network Booting from: I82559, Controller 0, Device 0
Device Name: /pci@fe000000/pci8086,1209@e,0:0,0
Loading: zImage.pplus
Client IP Address = 192.168.120.38
Server IP Address = 192.168.120.35
Gateway IP Address = 0.0.0.0
Subnet IP Address Mask = 255.255.255.0
Boot File Name = zImage.pplus
Argument File Name =
Network Boot File load in progress... To abort hit <BREAK>
Bytes Received =&700757, Bytes Loaded =&700757
Bytes/Second =&700757, Elapsed Time =1 Second(s)
Exception: Program (Illegal Instruction)
SRR0 =001F0000 SRR1 =00083040 Vector-Offset =00700
IP =001F0000 MSR =00003040 CR =00000000 FPSCR =00000000
R0 =00000000 R1 =03F00000 R2 =00000000 R3 =00000000
R4 =00000000 R5 =49504C01 R6 =00007000 R7 =001F0000
R8 =03F0CF54 R9 =03F0CD54 R10 =03F0CD60 R11 =03F0CE54
R12 =03F0CE54 R13 =00000000 R14 =00000000 R15 =00000000
R16 =00000000 R17 =00000000 R18 =00000000 R19 =00000000
R20 =00000000 R21 =00000000 R22 =00000000 R23 =00000000
R24 =00000000 R25 =00000000 R26 =00000000 R27 =00000000
R28 =00000000 R29 =00000000 R30 =00000000 R31 =00000000
SPR0 =00000000 SPR1 =00000000 SPR8 =00000000 SPR9 =00000000
001F0000 00040000 WORD $00040000
I have done the modification you advised me and also an other one (to
compile :-(
Okay. Try this. Undo what I told you last time, and make the end of
the file look like:
#if 0
.comm .stack,4096*2,4
#endif
This may or may not compile. I have a feeling there'll be some egg on
my face shortly...
--
Tom Rini (TR1265)
http://gate.crashing.org/~trini/
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/