RE: Flash Driver

Coool!! Now I have the flash driver registering itself and telling me
all about the number of partitions on my flash etc. etc. I have the
flash device in the /dev directory. Now, how do I use them? I remember
using them before using the dd command.

Thank you,
Navin.

-----Original Message-----
From: Wolfgang Denk [mailto:wd@denx.de]
Sent: Monday, August 13, 2001 5:29 PM
To: Navin Boppuri
Cc: Linuxppc-Embedded (E-mail)
Subject: Re: Flash Driver


In message [ref]
you wrote:

Can someone tell me how to set up and use the flash driver in the

2.4.x

Linux kernel. I see a CFI and non-CFI support for the AMD flash chips.

I

You mean the driver we maintain?

am using an AMD flash chip on my board. Which one of the drivers do I
load? How are these initialized?

For AMD chips, configure:

	CONFIG_FLASH=y
	CONFIG_AMD_FLASH=y

Add a "partition" scheme for your board to
"drivers/char/flash_config.c";
see the comment in this file.

There is no more configuration needed (assuming you are booting  from
PPCBoot, which will pass the necessary parameters to the Linux kernel
[physical start address and size of the flash memory]).

I have not been able to find any documentation on this. Any help is

very

appreciated.

Just ask :-)

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
Q: How do you spell "onomatopoeia"?
A: The way it sounds.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/