In message [off-list ref] you wrote:
I am new to rtlinux. I want to install rtlinux on mpc860 board.
I have a mpc860T mdppro board. Can somebody guide me on which rtlinux I
should use and what are the steps that I will require to perform to
install the rtlinux on board.
We have a patch for RTLinux-3.0 on our FTP server, as well as a
kernel that is known to work with this patch (there are other, newer
kernel versions as well, but these might need a little work adapting
the patch). Included with the patch comes a `README.DENX' with
detailed description of the patch and installation procedure.
Please note that there is also a patch for RTAI-24.1.4. We will
maintain RTAI support in the future, but may (or may not) drop
support for RTLinux (no technical reasons, just because of the patent
issue).
Please see:
ftp://ftp.denx.de/pub/LinuxPPC/usr/src/linux-2.4.4-2001-05-12.tar.bz2
ftp://ftp.denx.de/pub/LinuxPPC/usr/src/rtlinux-3.0-denx.tar.bz2
ftp://ftp.denx.de/pub/LinuxPPC/usr/src/rtai-24.1.4-denx.tar.bz2
and maybe:
ftp://ftp.denx.de/pub/LinuxPPC/usr/src/linux-2.4.4-2001-07-23.tar.bz2
Hope this helps,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de
Weekends were made for programming. - Karl Lehenbauer
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Hi,
Thanks for reply. I downloaded the rtlinux kernel you suggested and
patched it from your ftp site. After I configured it and tried to do "make
dep" it gave me error "llinux/limits.h no such file or directory" in
scripts/mkdep.c . I have extracted the sources in my home directory. Is it
necessry that I should extract it under /usr/src/linux or I am missing
something.
Also I am a littlebit confused about what machine type I should
select for my mdppro board.
Thanks and regards,
Kapil.
Wolfgang Denk wrote:
In message [off-list ref] you wrote:
quoted
I am new to rtlinux. I want to install rtlinux on mpc860 board.
I have a mpc860T mdppro board. Can somebody guide me on which rtlinux I
should use and what are the steps that I will require to perform to
install the rtlinux on board.
We have a patch for RTLinux-3.0 on our FTP server, as well as a
kernel that is known to work with this patch (there are other, newer
kernel versions as well, but these might need a little work adapting
the patch). Included with the patch comes a `README.DENX' with
detailed description of the patch and installation procedure.
Please note that there is also a patch for RTAI-24.1.4. We will
maintain RTAI support in the future, but may (or may not) drop
support for RTLinux (no technical reasons, just because of the patent
issue).
Please see:
ftp://ftp.denx.de/pub/LinuxPPC/usr/src/linux-2.4.4-2001-05-12.tar.bz2
ftp://ftp.denx.de/pub/LinuxPPC/usr/src/rtlinux-3.0-denx.tar.bz2
ftp://ftp.denx.de/pub/LinuxPPC/usr/src/rtai-24.1.4-denx.tar.bz2
and maybe:
ftp://ftp.denx.de/pub/LinuxPPC/usr/src/linux-2.4.4-2001-07-23.tar.bz2
Hope this helps,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de
Weekends were made for programming. - Karl Lehenbauer
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Sorry, I found that I had invalid link in my usr/src.
However when I do a meke xconfig I do not see any option like "RTLinux kernel
extension" in platform support.
Thanks and regards,
Kapil
Kapil Konde wrote:
Hi,
Thanks for reply. I downloaded the rtlinux kernel you suggested and
patched it from your ftp site. After I configured it and tried to do "make
dep" it gave me error "llinux/limits.h no such file or directory" in
scripts/mkdep.c . I have extracted the sources in my home directory. Is it
necessry that I should extract it under /usr/src/linux or I am missing
something.
Also I am a littlebit confused about what machine type I should
select for my mdppro board.
Thanks and regards,
Kapil.
Wolfgang Denk wrote:
quoted
In message [off-list ref] you wrote:
quoted
I am new to rtlinux. I want to install rtlinux on mpc860 board.
I have a mpc860T mdppro board. Can somebody guide me on which rtlinux I
should use and what are the steps that I will require to perform to
install the rtlinux on board.
We have a patch for RTLinux-3.0 on our FTP server, as well as a
kernel that is known to work with this patch (there are other, newer
kernel versions as well, but these might need a little work adapting
the patch). Included with the patch comes a `README.DENX' with
detailed description of the patch and installation procedure.
Please note that there is also a patch for RTAI-24.1.4. We will
maintain RTAI support in the future, but may (or may not) drop
support for RTLinux (no technical reasons, just because of the patent
issue).
Please see:
ftp://ftp.denx.de/pub/LinuxPPC/usr/src/linux-2.4.4-2001-05-12.tar.bz2
ftp://ftp.denx.de/pub/LinuxPPC/usr/src/rtlinux-3.0-denx.tar.bz2
ftp://ftp.denx.de/pub/LinuxPPC/usr/src/rtai-24.1.4-denx.tar.bz2
and maybe:
ftp://ftp.denx.de/pub/LinuxPPC/usr/src/linux-2.4.4-2001-07-23.tar.bz2
Hope this helps,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de
Weekends were made for programming. - Karl Lehenbauer
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/