RE: Sandpoint 3 + MPC7450 + HHL2

I'm sitting on a bunch of changes for both Sandpoint X3 and 7450.  With
the new cputable stuff in 2.4_devel, I'll stuff the 7450 changes in
there.

sounds good to me

quoted

...after adding a enable for the TimeBase

So, you have an old version of DINK.  Get it updated as you are probably
missing more than that.

I am using dink32 v12.2 of 16Feb2001.  My Abatron sets the TBEN bit, I run &
halt dink32 after getting the dink prompt and TBEN is still set but when I
run the downloaded zImage and halt when it "appears" to hang TBEN has been
cleared.

Neil

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/