Hello,
I am porting Linux (2.2 or 2.4) to PrPMC750 board.
But the Linux cannot boot yet from Network boot.
Does anyone know how it can boot?
My environment is:
Kernel MontaVista CDK 1.2 (2.2.14 or 2.4-test2)
Kernel 2.4.3-pre2
Moniter PPCBug
Regards,
Toshi Murakami
[Fri, 09 Mar 2001 11:41:36 +0900]
^------------------------------------^
Toshimitsu Murakami RealVision Inc.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Hello,
I am porting Linux (2.2 or 2.4) to PrPMC750 board.
But the Linux cannot boot yet from Network boot.
Does anyone know how it can boot?
My environment is:
Kernel MontaVista CDK 1.2 (2.2.14 or 2.4-test2)
Kernel 2.4.3-pre2
Moniter PPCBug
The experimental 2_5 kernel at fsmlabs support the PrPMC750. I have not
tested it, but I'm working on a 'similar' board and it works fine.
Bye.
Stefano.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Hi, Stefano,
Thank you for information.
But I cannot find the 2_5 kernel of RTLinux at fsmlabs' ftp.
Can I use version 3.0 instead of 2_5?
Good day.
Toshi
Stefano Coluccini wrote on Fri, 9 Mar 2001 09:51:32 +0100
quoted
Hello,
I am porting Linux (2.2 or 2.4) to PrPMC750 board.
But the Linux cannot boot yet from Network boot.
Does anyone know how it can boot?
My environment is:
Kernel MontaVista CDK 1.2 (2.2.14 or 2.4-test2)
Kernel 2.4.3-pre2
Moniter PPCBug
The experimental 2_5 kernel at fsmlabs support the PrPMC750. I have not
tested it, but I'm working on a 'similar' board and it works fine.
Bye.
Stefano.
Toshi Murakami
[Fri, 09 Mar 2001 18:29:06 +0900]
^------------------------------------^
Toshimitsu Murakami RealVision Inc.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Hi, Stefano,
Thank you for information.
But I cannot find the 2_5 kernel of RTLinux at fsmlabs' ftp.
Can I use version 3.0 instead of 2_5?
Excuse me, too brief in my precedent mail, you can download the 2_5 kernel
tree with bitkeeper connecting to the port 5005. You can find some hints at:
http://bitkeeper.fsmlabs.com/linuxppcbk.html
It is not the RTLinux kernel, it is the standard linuxppc kernel under
development.
Bye.
Stefano.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Does you PvPMC750 board use powerpc 750 CPU?
Thank you very much.
machael thailer
----- Original Message -----
From: "Stefano Coluccini" <redacted>
To: "Toshimitsu Murakami" <redacted>;
[off-list ref]
Sent: Friday, March 09, 2001 4:51 PM
Subject: RE: PrPMC750 board supported?
quoted
Hello,
I am porting Linux (2.2 or 2.4) to PrPMC750 board.
But the Linux cannot boot yet from Network boot.
Does anyone know how it can boot?
My environment is:
Kernel MontaVista CDK 1.2 (2.2.14 or 2.4-test2)
Kernel 2.4.3-pre2
Moniter PPCBug
The experimental 2_5 kernel at fsmlabs support the PrPMC750. I have not
tested it, but I'm working on a 'similar' board and it works fine.
Bye.
Stefano.
Our BriQs boots just fine over the network.
We are using Yaboot.
Then again - your platform, I think, is just a PREP while we have the
advantage of Open Firmware. I don't know if that makes a difference?
Sincerely,
Dr. Karsten Jeppesen
VP of Technology
Total Impact
[off-list ref]
----------------------------------------------------------------------
"By the time they had diminished from 50 to 8, the other dwarves began
to suspect 'Hungry' ..."
-- Gary Larson, "The Far Side"
----------------------------------------------------------------------
From: "machael thailer" <redacted>
Date: Fri, 27 Apr 2001 16:01:13 +0800
To: "Stefano Coluccini" <redacted>, "Toshimitsu Murakami"
[off-list ref], [off-list ref]
Subject: Re: PrPMC750 board supported?
Does you PvPMC750 board use powerpc 750 CPU?
Thank you very much.
machael thailer
----- Original Message -----
From: "Stefano Coluccini" <redacted>
To: "Toshimitsu Murakami" <redacted>;
[off-list ref]
Sent: Friday, March 09, 2001 4:51 PM
Subject: RE: PrPMC750 board supported?
quoted
quoted
Hello,
I am porting Linux (2.2 or 2.4) to PrPMC750 board.
But the Linux cannot boot yet from Network boot.
Does anyone know how it can boot?
My environment is:
Kernel MontaVista CDK 1.2 (2.2.14 or 2.4-test2)
Kernel 2.4.3-pre2
Moniter PPCBug
The experimental 2_5 kernel at fsmlabs support the PrPMC750. I have not
tested it, but I'm working on a 'similar' board and it works fine.
Bye.
Stefano.