Re: Timing Facilities

Thu, Feb 22, 2001,Joseph P. Garcia wrote:

On Wed, 21 Feb 2001 23:24:57 -0600, Steve Poole [off-list ref] wrote:

quoted

I have written a small assembly fragment to read the TB register that runs
under Linux (YDL/BLL). What is the definition of a "tick" or "jiffie" under
Linux. When some code is run under MacOS (400MHz G4) the results are
*faster* (the numbers returned are lower) than when I run on a 500MHz G4. I
appreciate any input.

I beleive there are 1*HZ jiffies in one second.  Used in the kernel's
timer_list struct (to name one use), which basically has the kernel run a
function at a specific time.  ex, setting the 'expires' value to (jiffies +
HZ) will cause it to run one second from now.

the VEA TB rate is not fixed to the processor clock - but is related to the
bus freq (IIRC).  You can find the TB rate from OF (but beware of a report
that says the values stored are not always correct).

I did a similar thing a while ago - and, because high precision was not
required, just used gettime() and a few seconds sleep... to calibrate.

ciao,
Iain.

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/